Deutsch

Heavyweight Natuer: New progress in the efficiency of perovskite battery modules! Professor Zhang Xiaohong from Suzhou University, an alliance unit, issued a document

836
2024-04-19 16:05:39
Übersetzung anzeigen

Recently, Professor Zhang Xiaohong and Professor Peng Jun from the Functional Nanomaterials and Soft Materials Research Institute (FUNSOM) of Suzhou University, along with Professor Mohammad Khaja Nazeeruddin, Professor Paul J. Dyson, Professor Zhaofu Fei, and Professor Ding Yong from North China Electric Power University, collaborated to publish their research findings on Dopant additive synergy enhancement perovskite solar modules in the journal Nature. Peng Jun is the co first author of the paper, and Zhang Xiaohong is the co corresponding author of the paper.

Perovskite solar cells have become the most advanced new thin film photovoltaic technology due to their rapid improvement in efficiency and stability. However, compared with small laboratory scale batteries, the main bottlenecks hindering the commercialization of large-area perovskite battery modules are low efficiency, poor stability, and low repeatability.

In response to the key scientific issues mentioned above, Zhang Xiaohong, Peng Jun, and their collaborators recently adopted a strategy of using methylammonium chloride (MACl) as a dopant and 1,3-bis (cyanomethyl) imidazole chloride ([Bcmim] Cl) as a Lewis alkaline ionic liquid additive to significantly inhibit the degradation of perovskite precursor solutions, reduce MACl aggregation, and thus prepare high-quality perovskite films with oriented growth and excellent crystallization. A steady-state efficiency of 22.97% was achieved on a perovskite battery module with an aperture area of approximately 27.22cm2, successfully breaking the world record for steady-state efficiency of perovskite modules (National Photovoltaic Industry Metrology and Testing Center, NPVM certification). In addition, under working conditions of 65 degrees Celsius, after 1000 consecutive hours of light aging, the efficiency of the perovskite battery module obtained from the test still maintains 87.19% of the initial value, which fully demonstrates its excellent photothermal stability.

More importantly, this work reveals the intrinsic mechanism of the synergistic effect between dopants and additives, namely proton exchange and multi-point interactions, providing a practical and feasible solution for improving the performance of large-area perovskite battery modules.

Title of the article: Dopant-additive synergism enhances perovskite solar modules


Article website: https://www.nature.com/articles/s41586-024-07228-z

Ding, B., Ding, Y., Peng, J. et al. Dopant-additive synergism enhances perovskite solar modules. Nature 628, 299–305 (2024). https://doi.org/10.1038/s41586-024-07228-z

Source: Yangtze River Delta Laser

Ähnliche Empfehlungen
  • First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

    Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm ...

    2024-05-07
    Übersetzung anzeigen
  • Significant progress made in 808nm high-power semiconductor laser chips

    The R&D team of Xi'an Lixin Optoelectronics Technology Co., Ltd. (hereinafter referred to as "Lixin Optoelectronics") has made significant progress in 808nm high-power semiconductor laser chips through continuous technological breakthroughs.808nm semiconductor laser, as an ideal and efficient solid-state laser pump source, plays an important role in advanced manufacturing, mechanical processin...

    2024-06-14
    Übersetzung anzeigen
  • MICRONICS launches its innovative SLS 3D printer product

    3D printing company Micronics announced the launch of its new Micron desktop selective laser sintering (SLS) 3D printer.The company stated that Micron is priced at $2999 and aims to bring industrial grade 3D printing capabilities to desktops for professionals and hobbyists. One of the main features of Micron is its ability to print complex objects without the need for supporting structures. This i...

    2024-06-17
    Übersetzung anzeigen
  • The United States is expected to use "AI+lasers" to deal with space debris in the future

    Due to the increasing threat of space debris in low Earth orbit around the Earth, space agencies around the world are becoming increasingly concerned about this. According to a new study funded by the National Aeronautics and Space Administration (NASA), it may be possible to send space debris that may be at risk of colliding with orbiting spacecraft to safer orbits through a laser network deploye...

    2023-10-20
    Übersetzung anzeigen
  • Danish scientists have created solar cells based on selenium using a new laser annealing technique

    A team of scientists at the Technical University of Denmark has created a selene-based solar cell by replacing thermal annealing with a new laser annealing strategy."In our work, we investigated the potential of this laser annealing strategy specifically for selenium thin film solar cells, and we report a new world record for fill factor, a new world record for ideal factor, and the most advanced ...

    2023-09-06
    Übersetzung anzeigen