chanelink logo
CHANELINK
Deutsch

BMW uses WAAM 3D printing to optimize derivative designs

738
2024-04-13 13:45:50
Übersetzung anzeigen

BMW explained how to use WAAM (Arc Additive Manufacturing) starting from 2025 to manufacture lighter and stronger automotive components and reduce waste generation, in order to optimize the use of generative design tools.

The demonstrated WAAM process uses aluminum wire raw materials directly deposited through laser welding heads, enabling automotive companies to manufacture lighter and more robust parts than similar large parts.

BMW stated that in order to optimize the parts manufactured using this technology, the combination of manufacturing processes and general new component design is crucial. To this end, BMW is accelerating the use of generative design and working closely with interdisciplinary teams to develop its own algorithms, partially inspired by the natural evolution process.

Karol Virsik, Head of Vehicle Research at BMW Group, said, "What is impressive is how WAAM technology has evolved from research to a flexible tool that can be used not only for testing components, but also for mass production of components." "The use of generative design methods allows us to fully utilize design freedom, thus fully utilizing the potential of technology. Just a few years ago, this was unimaginable."

Although these components have wide welds, BMW engineers have proven that WAAM components can still be used for high loads without the need for precision machining of surfaces.

Since 2021, BMW has been testing this DED process at its additive manufacturing park in Oberschlei ß heim, Germany, where the first batch of components will be produced. BMW expects to increase production in other locations by using existing assembly lines with new software.

BMW stated that the adoption of WAAM technology will not replace SLS technology for more refined parts, but arc additive manufacturing technology is "superior" in terms of possible size and deposition rate of parts.

The company is even considering using WAAM technology to directly produce individual components on assembly lines, as this technology does not require new tools and only requires software changes to manufacture different components.

Source: NetEase Network

Ähnliche Empfehlungen

  • The green and blue laser diode series provides higher beam quality

    Rutronik has expanded its optoelectronic product portfolio by introducing green and blue laser diodes packaged in metal cans TO38 and TO56 using AM OSRAM. They leave a deep impression with improved beam quality and stricter electro-optic tolerances. The power level of the laser diode ranges from 10mW to 100mW. Diodes such as PLT3 520FB and PLT5 450GB are now available on the market.The flexibility...

    2024-01-31
    Übersetzung anzeigen

  • New types of lenses in optics: Researchers develop hybrid achromatic lenses with high focusing efficiency

    Researchers at the University of Illinois at Urbana Champaign have developed compact visible wavelength achromatic mirrors using 3D printing and porous silicon, which are crucial for miniaturization and lightweight optical devices. These high-performance hybrid micro optical devices can achieve high focusing efficiency while minimizing volume and thickness. In addition, these microlenses c...

    2023-12-11
    Übersetzung anzeigen

  • Unsupervised physical neural network empowers stacked imaging denoising algorithm

    In view of the reconstruction problem of stack imaging technology in noisy environment, Lin Nan's team from Shanghai Institute of Optics and Mechanics, Chinese Academy of Sciences, proposed an innovative method ProPtyNet based on unsupervised physical neural network, which is expected to be applied to chip CD measurement and defect detection. The article was published in Optics and lasers in engin...

    03-25
    Übersetzung anzeigen

  • ABB will add optical sensors to four greenhouse gas monitoring satellites

    ABB has signed a third contract with the global leader in high-resolution space greenhouse gas monitoring, GHGSat, to manufacture optical sensors for its C12, C13, C14, and C15 satellites. It is reported that C12, C13, C14, and C15 satellites are scheduled to be launched into orbit in 2024.These new satellites will join GHGSat's expanding constellation for detecting and quantifying industrial gas ...

    2023-12-06
    Übersetzung anzeigen

  • The research team of Xi 'an Jiaotong University and Northwestern Polytechnical University proposed a new technology of laser cutting water to provide a new idea for the application of "water"

    Water is a natural resource that human beings depend on for survival and is used in many fields. In recent years, the patterning and flow control of trace water have attracted wide attention in materials science, chemistry, biomedicine and other fields."Draw the knife to cut off the water more flow"? No, it's "Laser cut water pattern"! On September 1, the reporter learned that Xi 'an Jiaotong Univ...

    2023-09-05
    Übersetzung anzeigen