Deutsch

Molecular orientation is key: a new perspective on revealing electronic behavior using two-photon emission spectroscopy

653
2024-03-19 16:20:43
Übersetzung anzeigen

Organic electronics has aroused great interest in academia and industry due to its potential applications in OLEDs and organic solar cells, with advantages such as lightweight design, flexibility, and cost-effectiveness. These devices are made by depositing organic molecular thin films onto a substrate that serves as electrodes and exerting their effects by controlling electron transfer between the film and substrate. Therefore, understanding the electronic behavior at the interface between the substrate and the thin film, as well as the electronic properties of organic thin films, is crucial for the further development of organic electronics. In addition, simultaneous observation of photocarrier electrons and intramolecular photoexcitation will provide more insights into organic molecular thin films.

Although a technique called photoelectron spectroscopy has been used to study the static electronic states of organic molecule films in detail, accurately detecting the dynamic behavior of electrons attempting to express their functions in devices has always been challenging and hindering progress.

The research team led by Associate Professor Masahiro Shibuta from the Graduate School of Engineering at Osaka City University used two-photon emission spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction to observe the electronic behavior and surface structure of triphenyl molecular thin films deposited on graphite substrates. The results indicate that TP molecules exhibit a special structure, which adsorbs on the substrate in a standing structure. Under light irradiation, two electrons are injected into TP molecules from the substrate, and photoexcited electrons in the molecular thin film are successfully observed simultaneously in a single sample. In addition, strong photoluminescence was also observed on thin films with a special structure consisting of only one layer of molecules, where the molecules were diagonally adsorbed onto the substrate, similar to the case of TP molecules. It is expected that these results will contribute to the development of new luminescent materials and the further development of functional organic electronic devices.

"2PPE spectroscopy is still a new method for evaluating electronic states, but its drawback is that although well optimized measurements are time-consuming, electronic states are sometimes well observed and sometimes not," said Professor Shibuta. Our research findings emphasize that the visibility of electronic states is closely related to the adsorption mode and electronic properties of molecules on the substrate. In other words, not only the type of molecules, but also their arrangement must be appropriately controlled to create a device that can fully demonstrate their functions. I am pleased that our research provides insights for the development of functional materials for practical applications.

Source: Laser Net

Ähnliche Empfehlungen
  • Trends and Reflections on the Laser Industry in 2025

    In 2024, the laser industry will still reach new heights, although some predicted concerns have been fulfilled! From beginning to end, the development path of the manufacturing industry has been full of uncertainty, but as time passes and we enter a new year, new technologies continue to emerge like mushrooms after rain.In 2025, practitioners in the laser and manufacturing industries still face ma...

    01-02
    Übersetzung anzeigen
  • The semiconductor Institute has made progress in the study of high power and low noise quantum dot DFB single-mode lasers

    Recently, the team of Yang Tao-Yang Xiaoguang, a researcher at the Key Laboratory of Materials Science of the Institute of Semiconductors of the Chinese Academy of Sciences, and Lu Dan, a researcher, together with Ji Chen, a professor at the Zhijiang Laboratory of Zhejiang University, have made important progress in the research of high-power, low-noise quantum dot DFB single-mode lasers.Distribut...

    2023-09-05
    Übersetzung anzeigen
  • The Influence of Laser Beam Intensity Distribution on Lock Hole Geometry and Process Stability under Green Laser Radiation

    Researchers from the University of Aveiro in Portugal and the School of Engineering at Porto Institute of Technology (ISEP) in Portugal reported a study on the influence of laser beam intensity distribution on the geometric shape and process stability of lock holes under green laser radiation. The relevant paper titled "Influence of Laser Beam Intensity Distribution on Keyhole Geometry and Process...

    03-26
    Übersetzung anzeigen
  • Application of Airborne Lidar Calibration Board in Various Fields

    With the rapid development of technology, airborne LiDAR technology has become one of the key technologies in modern surveying, remote sensing, navigation and other fields. As an important component of this technology, the airborne LiDAR calibration board plays a crucial role in ensuring the accuracy and stability of the radar system. This article will explore the application and importance of air...

    2024-04-08
    Übersetzung anzeigen
  • Mycronic receives first order after upgrading solid-state lasers

    Recently, Mycronic AB received its first order from SK Electronics in Japan to upgrade the installed display mask writer from a gas laser to a solid-state laser. The upgrade is scheduled to be delivered within the next two years.Image source: MycronicIt is reported that Mycronic's "Pattern Generators" department provides mask writers for display manufacturing and semiconductor production. So far, ...

    2023-10-16
    Übersetzung anzeigen