Deutsch

Using a new type of ground laser to track space debris

770
2024-03-14 14:39:54
Übersetzung anzeigen

The Polish Space Research Center of the Celestial Geodynamics Observatory located in Borowitz near Poznan will enhance its capabilities with a new and powerful laser.

The first task of this state-of-the-art device is to enable researchers to accurately track the trajectories of 300 previously identified space debris in no less than six months.

Observatory Director Pawe ł  Lejba emphasized the importance of this upgrade, saying, "Thanks to funding from the Ministry of Science and Higher Education, we are able to purchase high-power, pulsed, and nanosecond Nd: YAG lasers along the integrated optical laser rangefinder system, which is being developed directly at our laser station, which is part of the Borowitz Celestial Geodynamic Observatory CBK PAN.".
Space debris, especially in low Earth orbit, has become an increasingly challenging issue. Approximately 30000 fragments larger than 10 centimeters were also discovered in the orbital belt less than 2000 kilometers from the Earth's surface.

They travel at a speed of about 7 kilometers per second, threatening major objects such as satellites and the International Space Station. The International Space Station orbits the Earth at an altitude of approximately 400 kilometers and flies around the Earth about 15 times a day.
The European Space Agency reported that in 2022 alone, 2409 payloads were sent into orbit. Most of them are small satellites designed to burn out when they re-enter the atmosphere in two years. With the continuous expansion of commercial space activities such as StarLink Internet satellite system, the number of man-made objects around the earth is growing rapidly.

In 2009, the Iridium 33 satellite collided with the Russian Cosmos 2251 satellite, marking the first such disaster in history, resulting in the complete destruction of both satellites and the production of over 700 pieces of debris.

In order to mitigate this risk, the Inter Agency Space Debris Coordination Committee was established in 1993. It issued guidelines stating that inactive satellites must be removed from orbit within 25 years after the completion of the mission. This directive aims to prevent the so-called Kessler syndrome, where the density of objects in space is so high that collisions between fragments will lead to a series of further collisions.

The new laser at Borowiec station is funded by a 2.3 million zloty grant, provided by Eurotek International headquartered in Warsaw, and is a key tool to address this challenge. It will be put into use in the second half of 2024 and will provide accurate information on the quantity and orbit of space debris to support efforts to clean up space. Its detection system allows for the reception of photons sent by lasers to objects located in Earth's orbit. When the beam of light reaches the tracked object, it bounces off the object and returns to the rangefinder, allowing for precise determination of the object's height and velocity relative to the Earth.

Since the 1980s, the Borowiec laser station has been a part of the Astro Geodynamic Observatory and a member of the International Laser Ranging Service. It conducts laser measurements of the distance to artificial satellites and space debris on Earth, making it a unique institution in Poland.
The observatory also has a time laboratory, one of the three stations of the country's most accurate atomic clock and the large international radio telescope LOFAR.

Source: Laser Net

Ähnliche Empfehlungen
  • Chuangxin Laser Industry Dedicated Laser and Solutions Help Promote the Intelligent Development of Cladding Application Industry

    Laser cladding technology, also known as laser additive manufacturing technology, uses high-energy laser as the heat source and metal alloy powder as the cladding material. Through the synchronous action of laser and alloy powder on the metal surface, it quickly melts to form a molten pool, and rapidly solidifies to form a dense, uniform, and controllable thickness metallurgical bonding layer, the...

    2023-11-01
    Übersetzung anzeigen
  • Dutch satellite instruments have achieved milestone achievements in transmitting laser data to Earth

    TNO wrote that this is the first time Dutch technology has been used to send data from a satellite to a ground station press release on Earth. This technology uses invisible laser signals to achieve faster and safer data flow compared to ubiquitous communication radio frequencies.Kees Buijsrogge, Director of TNO Space, said, "This critical milestone marks a significant achievement for the Netherla...

    2024-01-25
    Übersetzung anzeigen
  • The Ruefeng 30w picosecond laser brings unprecedented possibilities in the art of cutting resin eye lenses

    Ruifeng Picosecond laser: Open the door to the art of cutting resin eye lensesAs an important innovation in the modern eyewear industry, resin lenses bring us visual clarity and comfort with their lightness, transparency and impact resistance.However, with the continuous improvement of people's demand for quality and personalization, how to achieve accurate and beautiful cutting on resin eye lense...

    2023-09-14
    Übersetzung anzeigen
  • Goethe, University of Central Florida research team showcases light and thin achromatic diffractive liquid crystal optical systems

    Headdisplay devices such as Apple Vision Pro, Meta Quest, and PICO are expected to completely change the way we perceive and interact with various digital information. By providing more direct interaction with digital information, MR has become one of the key driving forces for the metaverse, spatial computing, and digital twins, and has begun to be widely applied in fields such as intelligent tou...

    2023-09-26
    Übersetzung anzeigen
  • OpenLight raises $34 million for silicon photonics development

    OpenLight Photonics, the developer of photonic application-specific integrated circuit (PASIC) design tools established by software giant Synopsys, says it has raised $34 million in venture finance.The Santa Clara firm, whose process design kits (PDKs) support the integration of indium phosphide (InP) and silicon photonics components in complex layouts, says that the series A funding will see it r...

    08-27
    Übersetzung anzeigen