Recently, the State Key Laboratory of Intense Field Laser Physics of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made progress in the research of intense field terahertz light sources based on organic crystals. The relevant research results are titled Generation and characterization of intensive terahertz pul...
2023-10-0127610My Problem is pretty simpeli want to use Variable Text featurei create text filewriteHelloi save as test.csvi go into LightburnNew filewrite %0 font Ariali save as TestTexti go into Variable Text windowi load the csvi click every button inside therenothing ever happenswhy?
2023-09-2727210Hello,I want to know if it’s possible to show the exact position of each element before the cut starts.Why i want that, is because i want to first paint the MDF and after that cut, as it’s easier to do it like this, for me.So i know you can select “Frame” but that give you like the big picture, i would like to see exactly wh...
2023-09-2728510Anytime I do a ctrl-b to bring up the boolean tools, my system seems to hang. The boolean tools dialog box doesn’t appear and anything I click on after that - gives me a bell tone.Any idea how to get it to display? Thanks!
2023-09-2725310What is the reason why the laser motor autofocus is not ready？
2023-09-2825310The reason why the laser motor positioning and focusing are not ready is:1. The cooling capacity of the supporting cold water machine is insufficient. In winter, the contrast in cooling effect is not significant, but in summer, when the ambient temperature rises, it is impossible to effectively control the temperature of the cooling equipme...
2023-09-2824010How are the two motors on the y-axis of the laser cutting machine synchronized？
2023-09-2826710What is a three-axis laser engraving intelligent control system?
2023-09-2825310Hello everyone, I want to use the RDC6445G controller for the first time and I have some doubts:1- is it not necessary to reset the axes?2- Are the inputs on the CN3-CN4 connectors related to the hardware limit switches?3- where can I find all the documentation?4- Are the outputs on the CN1 connector programmable?Thanks in advance
2023-04-1842320Hello, I am new to LIGHTBURN and I am running to an issue when trying to enable air assist. I am using the SCULPFUN S330 and when I go into LIGHTBURN’s device settings to enable air assist I see that the M8 option should be selected. However I do not see the option for either M7 or M8 in the device settings. Directly under the Air Assist sect...
2023-09-2332421I cannot get Continuous Jogging. It was there before and now not showing in Move Window. LB V 1.4.GRBL V 1f$J error:3Grbl ‘$’ system command was not recognized or supported.Yet I did see Continuous Jogging before.I even created GRBL manually, no change.I really could use this feature.Any ideas?
2023-09-2631710After recently upgrading my TS2 to the larger extension i have discovered i can no longer make perfect circles.I have gone round and round (pun intended) with belt tension even as far as the tilt test to make sure that it can move on it’s own still. I have tried a different software package and got the same result.I’m incredibly new to ...
2023-09-2623210Help! I’m new to laser engraving. I have everything working well but when I engrave my lettering comes out backwards (mirrored). I searched and was told to go to Device Settings and adjust the “Origin” but there is no “Origin” button to be found.
2023-09-262673001 Deep research and development only for higher cost-effectivenessIn response to changes in market competition demand, Guangzhi Technology has developed a single pulse width and cost-effective GLE series pulse fiber laser based on the MOPA electronic control technology platform, with a power range of 20-200W, a complete range of products, and exce...
2023-09-2625611I need to open the GRBL configuration for Lasergrbl to change the value of $131 to 380. How do I do this?
2023-09-2527310
- Keine Daten
Deutsch
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski