I am planning to order a fiber laser marking/engraving machine. Almost done. It will be MOPA M7 100 W E2 source from JPT. Now the lenses: quartz material and i decided to take 4 lenses. My current pic...

• laser engraving
• laser marking

Iron Man

04-21

1.5K

3

1

Hello, we are encountering an issue with our F1 Ultra in combination with Lightburn. We recently updated everything to the newest version (XCS 2.3.24 / Lightburn 1.7.04 / F1 Ultra 40.52.012.2020.01.ht...

• laser engraving
• laser marking

Erdogan

01-02

1.3K

2

0

1. Fault phenomenon one: The laser marking machine does not produce laser light The troubleshooting steps are as follows: Power supply inspection: Firstly, it is necessary to confirm whether the powe...

• laser marking

Terrelle

01-10

1.2K

1

2

In the daily operation of laser equipment, the constant emission of light is a common and difficult problem to solve. It not only affects the quality of the product, but may also increase the maintena...

• laser cladding
• laser marking
• laser cutting

Abel

01-15

1.2K

3

3

I have a ThunderLaser Nova 24. The head goes to the home position after the job has completed. If I am engraving in the bottom of a tray with say one inch sidewalls what would be the best way to instr...

• laser marking

Hiroko

2024-09-27

1.2K

1

0

Laser marking machine is a high-precision marking equipment that can mark and engrave on various materials. When using a laser marking machine for marking, it is usually necessary to import the design...

• laser marking

Keegan

2024-05-30

1.2K

1

0

What is the reason for the jumping of the laser marking machine? Many people encounter jumping problems when using laser marking machines, which may be caused by the following factors: 1. Machine mal...

• laser marking

Payson

2024-12-17

1.1K

0

1

During the laser marking process, sometimes sparks may appear on the surface of the product marking, indicating that the marking of the product has had an excessive impact on the surface and a high su...

• laser marking

Gilbert

2024-05-11

1.2K

1

0

So when I engrave or cut the laser moves to the same position it starts from. When I use the rotary and engrave tumblers the laser head goes to a differant position from where it starts. This has chan...

• laser marking
• laser cutting

Noah

2024-10-15

1.1K

3

0

For laser marking machines, the marking effect is closely related to the characteristics of the material. In general, laser marking machines can clearly mark various metal materials, but there may be ...

• laser marking

roy

2024-06-28

1.1K

1

0

The occurrence of ghosting or blurriness during engraving operations on laser marking machines may be due to various reasons. To solve this problem, it is usually necessary to follow the following ste...

• laser marking

Miller

01-10

1.1K

1

3

To achieve deep marking, we can adjust the parameters of the laser marking machine through the following methods: 1. Adjust the focal length Reduce the focal length to the minimum to ensure that the ...

• laser marking

Liam

01-22

1.1K

0

0

Laser marking machine is a high-precision and high-efficiency marking equipment widely used in various fields such as marking, engraving, and engraving of materials. When using a laser marking machine...

• laser marking

Ruddy

2024-04-29

1.1K

1

0

On my rotary setup all my laser engravings work properly except for any circular shapes when done in the “line” setting. “Fill” setting works just fine as you can see in the picture with the logo. Whe...

• laser marking

JOST

2024-11-25

1.1K

4

0

Hello, We have a Boss LS 1630 and we are using the Piburn rotary attachment to try and engrave dog bowls. I have been able to use the roller to engrave cups just fine but I have tried to use the chuck...

• laser marking

Hiroko

2024-10-31

1.1K

1

0