繁体中文

Tsinghua University develops efficient and stable perovskite quantum dot deep red light devices

500
2025-03-18 14:02:42
查看翻譯

Semiconductor quantum dots have the advantages of high quantum yield, narrow emission spectrum, and compatibility with solution processes. They have shown broad application prospects and enormous economic value in the field of optoelectronic materials and devices, and related research has won the Nobel Prize in Chemistry in 2023.

Compared with traditional II-VI and III-V quantum dots (such as CdSe, CdS, InP, etc.), perovskite quantum dots have unique advantages such as low cost, simple synthesis process, and continuously tunable spectra, and have attracted much attention in recent years. The external quantum efficiency of light-emitting devices based on perovskite quantum dots has been improved to over 20%, reaching the threshold for commercial applications. However, due to the poor stability of perovskite quantum dots, the operating life of light-emitting devices is only tens or hundreds of hours, which hinders their further industrialization.

Perovskite quantum dots require ligands to bind to their surface in order to maintain colloidal stability. However, during the growth, purification, film formation, and storage of perovskite quantum dots, highly dynamic and unstable ligands on the surface are prone to detachment, resulting in insufficient coordination of surface atoms, an increase in unsaturated and dangling bonds, and non coordinated atoms on the surface easily binding to other atoms, leading to aggregation or Oswald ripening of perovskite quantum dots, producing various defects and further affecting their luminescence performance and stability.

Recently, the team led by Ma Dongxin from the Department of Chemistry at Tsinghua University proposed a molecular induced quantum dot maturation control strategy, achieving efficient and stable perovskite quantum dot deep red light devices. The team has designed a series of bidentate organic small molecules with small size and molecular flexibility, which can adhere to the surface of perovskite quantum dots by twisting their own structure, interact with mismatched Pb2+, maintain a stable surface state, suppress the adverse aging and aggregation phenomena of perovskite quantum dots, reduce the density of surface defect states, and improve quantum yield.


Figure 1. Schematic diagram of molecular induced quantum dot maturation control strategy


The team has constructed a deep red light device based on high-performance perovskite quantum dots, with a luminescence peak at 686nm and an external quantum efficiency of up to 26.0%. The device exhibits excellent operational stability, with a half-life of 310 minutes at a constant high current density of 13.3mA cm-2, and a half-life of up to 10587 hours at an initial radiance of 190mWSr-1m-2. In addition, this perovskite quantum dot solution exhibits excellent storability, with external quantum efficiencies of 21.7% and 20.3% for devices constructed from the solution after one and three months of storage, respectively.

The above results indicate that the molecular induced quantum dot maturation control strategy proposed in the paper can effectively improve the efficiency and stability of perovskite quantum dot light-emitting devices, making them practical and promising in high-definition displays and biomedical treatments.


Figure 2. Optoelectronic properties of perovskite quantum dot light-emitting devices

 


Figure 3. Stability of perovskite quantum dot light-emitting devices


The related research results, titled "Molecular Induced Ripening Control in Perovskite Quantum Dots for Efficient and Stable Light Emitting Diodes", were published on March 14th in Science Advances.

Chen Jiawei, a postdoctoral fellow in the Department of Chemistry at Tsinghua University, Chen Shulin, an associate professor at the School of Semiconductors (School of Integrated Circuits) at Hunan University, and Liu Xiangyu, a doctoral student in the Department of Chemistry at Tsinghua University, are the co first authors of the paper. Associate Professor Ma Dongxin from the Department of Chemistry at Tsinghua University is the corresponding author of the paper, and the Department of Chemistry at Tsinghua University is the first communication unit. The research has received support from the National Natural Science Foundation of China's Youth Fund, Tsinghua University's Solid Science Program, the Chinese Postdoctoral Program, the Chinese Postdoctoral Special Fund, the National Postdoctoral Researcher Program, and the Tsinghua University's "Water and Wood Scholars" Program.

Source: opticsky

相關推薦
  • Coherent's total fiscal 2023 revenue was $5.16 billion, with laser business accounting for 29 percent

    On August 16, Coherent, an American laser system solutions provider, announced its fiscal year 2023 and fourth quarter results for the year ended June 30, 2023. This is also the first annual report released after the merger of II-VI and Coherent.Fiscal year 2023 revenueCoherent reported revenue of $5.16 billion for the full fiscal year 2023, up 56% year over year.By business unit, the Networking b...

    2023-08-17
    查看翻譯
  • Laser Photonics officially launches its SaberTech laser cutting system

    Recently, Laser Photonics (LPC) officially launched its SaberTech laser cutting system. This system not only enriches the product line of LPC's laser cleaning, welding, marking, and engraving systems, but also marks another important breakthrough for the company in the field of laser technology. This product release is another heavyweight measure after LPC's latest generation laser cleaning system...

    2024-06-19
    查看翻譯
  • The tesat optical terminal selected by Lockheed Martin satellite has passed ground testing

    Tesat Spacecom's laser communication terminal announced on October 26th that the company has passed critical ground testing deployed on NASA satellites.Tesat's SCOTT80 optical terminal was selected by Lockheed Martin, one of several manufacturers producing satellites for the Space Development Agency.SDA is an agency under the United States Space Force that plans to deploy a network of interconnect...

    2023-10-27
    查看翻譯
  • Hamamatsu Photonics completes construction of new factory area

    Recently, Hamamatsu Photonics in Japan completed the construction of a new building at Miyakoda Manufacturing Co., Ltd. in Hamami ku, Hamamatsu City. The completion ceremony was held on July 29th, and the factory will start full production in November 2024, increasing overall production capacity by 2.5 times.Source: Hamamatsu PhotonicsIt is reported that Hamamatsu Photonics focuses on the developm...

    2024-08-01
    查看翻譯
  • Laser printing on fallen leaves can produce sensors for medical and laboratory use

    The manufacturing of sensors through 3D printing combines speed, design freedom, and the possibility of using waste as a substrate. In the circular economy model, various results have been achieved, and typically discarded residues are used as low-cost resources. A research team in Brazil has proposed a highly creative solution that involves printing electrochemical sensors on fallen leaves. The t...

    2024-05-16
    查看翻譯