繁体中文

First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

178
2024-05-07 16:45:29
查看翻譯

Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm figure-9 ultrafast laser with all fiber structure".

Laser with a wavelength around 900 nm is highly favored in the field of optical measurement due to its high responsiveness on silicon-based detectors. The low repetition rate fiber laser in this band can effectively reduce distance ambiguity in Time of Flight (TOF), and has the characteristics of good beam quality, compact structure, and long-term stability, making it an ideal light source for space detection. However, due to the strong dispersion and nonlinear effects of single-mode fibers, it is difficult for lasers to achieve single pulse operation in long fiber cavities. Therefore, the repetition frequency of traditional mode-locked fiber lasers is usually limited to tens to hundreds of MHz.

In response to the above issues, researchers have proposed a low repetition rate fully polarized nine cavity fiber laser with a central wavelength of 915 nm. By designing and optimizing the laser structure, high-energy single pulse output was achieved at low repetition rates. The optimized seed was amplified in one stage to obtain a pulse output with a pulse width of 15.2 ps and a single pulse energy of 4.7 nJ at a repetition frequency of 3.1 MHz. The mode locking performance of the laser has been confirmed through long-term power and spectral stability tests. This compact and long-term reliable fiber laser is a promising light source for future space laser ranging.

This work was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences, the National Natural Science Foundation of China, and the Shanghai Natural Science Foundation.

Figure 1. Experimental setup diagram of a 915 nm low repetition rate fully polarization maintaining nine cavity fiber laser

Figure 2. Long term stability testing of output power and spectrum, and output characteristics of pulses in frequency and time domains

Source: Yangtze River Delta Laser Alliance

相關推薦
  • Laser solder paste: comprehensive analysis of working principle and application fields

    Laser solder paste is a new type of high-tech laser soldering material that is widely used. Laser solder paste achieves high-precision control of circuit board soldering through laser heating in the electronic manufacturing process. This article will provide a detailed introduction to the working principle of laser solder paste and its applications in fields such as electronic manufacturing and au...

    2024-04-11
    查看翻譯
  • Hyperspectral imaging technology: a comprehensive guide from principles to applications

    Hyperspectral imaging technology is a highly anticipated innovation in the field of science and engineering today. It not only integrates spectroscopy and imaging technology, but also has wide applications in various industries and research fields. This article will delve into the basic principles, working mechanisms, and applications of hyperspectral imaging in different fields.Introduction to hy...

    2024-04-16
    查看翻譯
  • The Danish authorities have approved the sale of this laser manufacturer to Hamamatsu, Japan

    On May 6, 2024 local time, the Danish Business Administration (DBA) approved the sale of NKT Photonics to Photonics Management Europe S.R.L, a wholly-owned subsidiary of Hamamatsu Photonics K.K.On that day, Hamamatsu Photonics received a notice from the Danish Business Administration stating that the acquisition had been approved:(Source: The Danish Business Authority)NKT Photonics stated that the...

    2024-05-09
    查看翻譯
  • Observation of laser power changes in ultrafast protein dynamics

    When researchers at the Max Planck Institute of Medicine conducted their first ultrafast X-ray crystallographic experiment on myoglobin in 2015, they were not aware that they had conducted the wrong experiment. By increasing the power of X-ray free electron lasers to ensure usable diffraction patterns, lead researcher Ilme Schlichting said that they "suddenly entered the wrong [excited] state with...

    2024-02-28
    查看翻譯
  • LOTMAXX Announces the Launch of a Multifunctional 3D Printer with Laser Cutting Function

    LOTMAXX has announced the launch of the ET model, a new type of 3D printer that can also be used as a laser cutting machine. According to the manufacturer, the core component is a fast direct extruder with a printing speed of up to 500 millimeters per second.LOTMAXX ET features an all metal casing with a printing volume of 250 x 250 x 265 mm. According to the announcement, as a special feature, th...

    2023-11-09
    查看翻譯