繁体中文

Researchers have discovered a new method to improve the resolution of laser processing

470
2024-03-28 13:52:54
查看翻譯

Customized laser beams focused through transparent glass can generate a small dot inside the material. Researchers from Northeastern University have reported a method of using this small spot to improve laser material processing and increase processing resolution.


Their research results are published in the journal Optics Letters.

Laser processing, like drilling and cutting, is crucial in industries such as automobiles, semiconductors, and pharmaceuticals. The pulse width of an ultra short pulse laser source ranges from picoseconds to femtoseconds, and can be accurately processed in the range of micrometers to tens of micrometers. But recent progress requires smaller scales, below 100 nanometers, which is difficult to achieve with existing methods.

Researchers focus on laser beams with radial polarization, known as vector beams. The beam generates a longitudinal electric field at the focal point, resulting in a smaller spot than traditional beams.

Scientists have determined that this process has great potential in laser processing. However, one drawback is that due to the light refraction at the air material interface, the field weakens inside the material, thereby limiting its use.

"We overcame this by using oil immersion lenses to laser process glass substrates," exclaimed Yuichi Kozawa, Associate Professor at the Institute of Advanced Materials Multidisciplinary Research at Northeastern University and co-author of the paper. "Because the refractive indices of oil immersed and glass are almost the same, the light passing through them will not bend."

Further research on the behavior of radially polarized beams under circular focusing indicates that the longitudinal field is greatly enhanced. This enhancement is due to total reflection occurring at high convergence angles on the back between glass and air. By using a circularly polarized beam of light, Kozawa and his colleagues created a small focal point.

From there, they applied this method to processing glass surfaces with ultra short pulse laser beams. A single shot of the converted pulse on the back of the glass substrate will produce a hole with a diameter of 67 nanometers, approximately 1/16 of the wavelength of the laser beam.

"This breakthrough makes it possible to use enhanced longitudinal electric fields for direct material processing with higher accuracy," Kozawa added. "It provides a simple method to achieve processing scales below 100 nanometers and opens up new possibilities for laser nanoprocessing in various industries and scientific fields."

Source: Laser Net

相關推薦
  • Microstructure evolution and mechanical properties of Ti-6Al-4V alloy prepared by dual ultrasonic vibration assisted directional energy deposition

    1. Research backgroundDirected energy deposition (DED), as an efficient and economical technology in the field of additive manufacturing (AM), is widely used in the manufacturing of metal materials. However, its high heating and cooling rates, as well as significant temperature gradients, often lead to rapid solidification, forming cross layer columnar grains and internal defects, seriously affect...

    03-21
    查看翻譯
  • Successful First Satellite Earth Laser High Speed Image Transmission Experiment

    Recently, the reporter learned from Changguang Satellite Technology Co., Ltd. (hereinafter referred to as "Changguang Satellite") that the company used a self-developed vehicle mounted laser communication ground station to conduct satellite ground laser high-speed image transmission experiments with the onboard laser communication terminal of the "Jilin No.1" constellation MF02A04 satellite and ac...

    2023-10-14
    查看翻譯
  • Expert discussion at IEC TC110 conference: Laser display is expected to surpass traditional display solutions

    Recently, the International Electrotechnical Commission Electronic Display Technology Committee (IEC TC110) International Standards Conference was held in Qingdao, attracting more than 120 experts, scholars, and technical representatives from around the world, including Japan, South Korea, and the United States. At the IEC TC110 conference, laser display technology has won wide recognition from in...

    02-25
    查看翻譯
  • Snapmaker introduces new 20W and 40W laser modules

    Snapmaker has opened pre-orders for 20W and 40W laser modules, which are significant upgrades to the modules available on existing Snapmaker machines.Snapmaker says that with the 40W module installed, you will be able to cut 15 mm basswood plywood at a time at a speed of 20 mm/SEC. With 20W, you will cut 10mm at a rate of 10mm/SEC. That's a lot more than Artisan and Snapmaker 2.0 - both are comp...

    2023-08-04
    查看翻譯
  • Progress makes laser based imaging simpler and more three-dimensional

    a. b. Schematic diagram of PACTER system calibration and imaging program. BT, beam trap; DAQ, data acquisition unit; HWP, half wave plate; PBS, polarization beam splitter; ER, traverse the relay. The difference between the two modes is highlighted by a black dashed box. c. Schematic diagram of a single component ultrasonic transducer manufactured on ER. d. The ultrasound transducer detected 1D P...

    2023-12-05
    查看翻譯