chanelink logo
CHANELINK
简体中文

TDK introduces a new gold-wire-bonded optional NTC thermistor for laser diode temperature measurement

748
2023-09-08 14:25:05
查看翻译

TDK Corporation (TSE: 6762) announced the introduction of the new NTCWS series of NTC thermistors with gold wire bonding. These bonding NTC thermistors can be installed in packages via gold wire bonding to enable high precision temperature detection of laser diodes (LD) for optical communication. The series will begin mass production in September 2023.

The use of LD devices in optical communication transceivers is increasing, represented by 5G and LiDAR for distance measurement between vehicles. Since the wavelength of LD varies with temperature, controlling the temperature of LD is the key to improve its performance.

TDK's new NTCWS series temperature sensors support narrow tolerances (± 1%) of resistance and B values, and can be mounted near the LD using a gold wire joint for high precision temperature sensing. The NTCWS series thermistors have a compact, lead-free design and can withstand operating temperatures from -40 to 125 °C. TDK has initially released sensors with a B value of 3930 K ± 1% (NTCWS3UF103FC1GT and NTCWS3UF103HC1GT) and plans to release more products with additional features in the future.

TDK is committed to improving temperature sensor products for industrial and automotive applications and will continue to expand its NTC thermistor portfolio to meet market demand.

Main application
LD temperature sensing for optical communication transceivers and liDAR
Main features and advantages
Supports gold wire bonding that can be installed inside the LD package
Narrow tolerance for resistance and B values (± 1%)

About TDK Corporation
TDK Corporation is a global leader in electronic solutions for the intelligent society, headquartered in Tokyo, Japan. Based on a mastery of materials science, TDK is firmly at the forefront of technological developments and deliberately "attracts tomorrow" to embrace social change. 
The company was founded in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK's comprehensive, innovation-driven product portfolio includes passive components such as ceramic, aluminum electrolytic and thin-film capacitors, as well as magnetic, high-frequency, piezoelectric and protective devices. The product range also includes sensors and sensor systems, such as temperature and pressure, magnetic and MEMS sensors. In addition, TDK also provides power and energy devices, magnetic heads, etc. 

These products are marketed under the TDK, EPCOS, InvenSense, Micronas, Tronics and TDK-Lambda product brands. TDK focuses on high-demand markets in the automotive, industrial and consumer electronics, and information and communications technology sectors. The company has a network of design and manufacturing locations and sales offices in Asia, Europe, and North and South America. In fiscal year 2023, TDK had total sales of $16.1 billion and employs approximately 103,000 people worldwide.

Source: Laser Network

相关推荐

  • Southeast University makes new progress in quantum efficiency research of van der Waals light-emitting diodes

    Recently, Professor Ni Zhenhua from the School of Electronic Science and Engineering at Southeast University, Professor Lv Junpeng from the School of Physics, Professor Liu Hongwei from the School of Physical Science and Technology at Nanjing Normal University, and Professor Zhou Peng from the School of Microelectronics at Fudan University collaborated to propose a van der Waals light-emitting dio...

    2024-10-28
    查看翻译

  • Semiconductor lasers will support both TE and TM modes

    Typically, for lasers in optical communication systems, waveguide designs are used to achieve a single transverse mode. By adjusting the thickness of the surrounding area of the cladding layer and the etching depth of the ridge in the ridge waveguide device, a single mode device can be obtained. The importance of lasers is reflected in the following aspects:A chip without ridge waveguide design an...

    2023-10-20
    查看翻译

  • German team develops and promotes laser technology for formable hybrid components

    Scientists from the Hanover Laser Center (LZH) in Germany are studying two laser based processes for producing load adapted hybrid solid components.From a transaction perspective, mixing semi-finished products can help save materials and production costs, but if the components that need to be replaced are made of expensive materials, these materials need to meet high requirements in future use, su...

    2023-08-16
    查看翻译

  • The University of Stuttgart has simplified the detection of nanoplastics

    Detecting the presence of nanoscale plastic particles in the environment has become a topic of concern for industrial societies worldwide, not least since particles of that size can evade the body's blood-brain barrier and damage metabolic processes.Optical technologies have been at the forefront of these monitoring efforts. Recent examples have included the use of stimulated Raman scattering to s...

    4 天前
    查看翻译

  • A research team from the University of Chicago in the United States has demonstrated a new method for obtaining mid infrared emission using colloidal quantum dots (QDs)

    According to reports, a research team at the University of Chicago in the United States recently demonstrated a new method for obtaining mid infrared emission using colloidal quantum dots (QDs), which may open up new applications for mid infrared light sources.Colloidal quantum dots are a type of semiconductor nanocrystal material that provides a promising approach for the synthesis of light sourc...

    2023-09-21
    查看翻译