简体中文

Beyond Limits: The Amazing Power of Water in Laser Development

933
2024-02-26 14:20:25
查看翻译

Water helps to generate ultra continuous white lasers with an extremely wide wavelength range.
Researchers have made significant progress in creating ultra wideband white laser sources, which have a wide wavelength range from ultraviolet to far-infrared. These advanced lasers are used in various fields, including imaging, femtosecond chemistry, telecommunications, laser spectroscopy, sensing, and ultrafast science.


Intense white laser projects a brilliant rainbow
However, this pursuit faces challenges, especially in selecting suitable nonlinear media. Although traditional solid materials are efficient, they are susceptible to optical damage under peak power conditions. Although gas media have resistance to damage, they are usually inefficient and technically complex.

Innovative solutions using water as a nonlinear medium
Researchers from South China University of Technology have recently taken non-traditional measures to treat water as a nonlinear medium. Water is abundant and inexpensive, and can be protected from optical damage even under the influence of high-power lasers. As reported in the Journal of Advanced Photonics in the Golden Open Access journal, water induced spectral broadening involves enhanced self phase modulation and stimulated Raman scattering, resulting in a supercontinuum white laser with a bandwidth of 435nm and 10dB, covering an impressive range of 478-913nm.

Progress in Cooperation between Water and CPPLN
To further innovate, researchers combined water with chirped periodically polarized lithium niobate (CPPLN) crystals, which are known for their powerful second-order nonlinear power. This cooperative relationship not only expands the frequency range of supercontinuum white laser, but also flattens its output spectrum. According to Professor Zhi Yuan Li, the senior author of the study, "The cascaded water CPPLN module provides a long lifespan, high stability, and low cost technical route for achieving 'three high' white lasers with strong pulse energy, high spectral flatness, and ultra wide bandwidth."

The results of the water CPPLN cooperation are expected. The pulse energy of this ultra wideband ultra continuous spectrum light source is 0.6 mJ, with a 10 dB bandwidth spanning one octave (413-907nm), and it has potential in ultrafast spectroscopy and hyperspectral imaging. Zhi Yuan Li observed, "It provides high resolution of physical, chemical, and biological processes at extreme spectral bandwidths with high signal-to-noise ratio. It opens up an efficient pathway to create long-lived, highly stable, and cost-effective white light lasers with strong pulse energy, high spectral flatness, and ultra wideband, paving the way for new possibilities in scientific research and application."

Source: Sohu

相关推荐
  • Researchers use laser doping to enhance the oxidation of IBC solar cells

    Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar ce...

    2024-02-20
    查看翻译
  • Micro laser opens the door to chip size sensors

    The new device is a frequency comb - a special type of laser that can generate multiple wavelengths of light, each with a fixed frequency interval. On the spectrogram, it looks a bit like the teeth of a comb. In approximately a quarter century since their first development, these "cursor rulers" have completely transformed various high-precision measurements from timing to molecular detection. In ...

    2024-03-13
    查看翻译
  • Laser Photonics Corporation sets high growth strategy for 2025

    Recently, laser cleaning equipment manufacturer Laser Photonics Corporation (LPC) announced its ambitious 2025 growth strategy, emphasizing innovation, strategic investment, and market expansion. LPC Executive Vice President John Armstrong stated:With a solid foundation laid in 2024, we will enter 2025 with clear momentum and a firm focus on growth. The progress we made last year - strengthening...

    01-20
    查看翻译
  • Laser printing on fallen leaves can produce sensors for medical and laboratory use

    The manufacturing of sensors through 3D printing combines speed, design freedom, and the possibility of using waste as a substrate. In the circular economy model, various results have been achieved, and typically discarded residues are used as low-cost resources. A research team in Brazil has proposed a highly creative solution that involves printing electrochemical sensors on fallen leaves. The t...

    2024-05-16
    查看翻译
  • Chuangxin Laser Industry Dedicated Laser and Solutions Help Promote the Intelligent Development of Cladding Application Industry

    Laser cladding technology, also known as laser additive manufacturing technology, uses high-energy laser as the heat source and metal alloy powder as the cladding material. Through the synchronous action of laser and alloy powder on the metal surface, it quickly melts to form a molten pool, and rapidly solidifies to form a dense, uniform, and controllable thickness metallurgical bonding layer, the...

    2023-11-01
    查看翻译