简体中文

Professor Wu Dong's team at the University of Science and Technology of China created a "dancing microrobot" using femtosecond laser composite materials.

667

2023-08-11 14:28:54

查看翻译

It was learned from the University of Science and Technology of China that the team of Professor Wu Dong of the Micro and Nano Engineering Laboratory of the school proposed a femtosecond laser two-in-one multi-material processing strategy, manufactured a micromechanical joint composed of temperature-sensitive hydrogel and metal nanoparticles, and then developed a multi-joint humanoid micromachine with a variety of deformation modes. The results were published in Nature Communications.

In recent years, femtosecond laser two-photon polymerization, as a true 3D processing method with nanometer precision, has been widely used to fabricate various functional microstructures. These microstructures show broad application prospects in the fields of micro-nano optics, microsensors and micromachine systems. However, how to use femtosecond laser to realize composite multi-material processing and further build micro-nano machinery with multi-mode is still a great challenge.

According to the researchers, the femtosecond laser two-in-one processing strategy includes the construction of hydrogel joints using asymmetric two-photon polymerization and the deposition of silver nanoparticles by laser reduction in local areas of joints. Among them, asymmetric photopolymerization technology can produce anisotropy in the cross-linking density of the local region of the hydrogel micro-joint, and finally make the bending deformation controllable in direction and Angle. In situ laser reduction deposition can accurately process silver nanoparticles on hydrogel joints. These silver nanoparticles have a strong photothermal conversion effect, which makes the mode switching of multi-joint micromachines exhibit excellent characteristics of ultra-short response time and ultra-low drive power.

As a typical example, eight micro-joints are integrated into a humanoid micromachine. Spatial light modulation technology is then used to achieve a multi-focus beam in 3D space, which in turn precisely stimulates each micro-joint. The cooperative deformation between multiple joints enables the humanoid micromanipulator to complete multiple reconfigurable deformation modes. Finally, the "dancing microrobot" was realized at the micron scale. As a proof of concept, by designing the distribution and deformation direction of the micro-joints, the double-jointed micro-robotic arm can collect multiple micro-particles in the same and different directions.

According to the researchers, the femtosecond laser two-in-one machining strategy can construct deformable micro-joints in various local areas of three-dimensional microstructures, and achieve a variety of reconfigurable deformation modes. In the future, micromanipulators with multiple deformation modes will show broad application prospects in micro-cargo collection, microfluidic manipulation and cell manipulation.

Source: Science and Technology Daily

Professor Wu Dong's team at the University of Science and Technology of China created a "dancing microrobot" using femtosecond laser composite materials.

Germany's leading optoelectronics industry (Jenoptik) in the first half of the gold over 4.2 billion

Valeo SCALA 3 LiDAR won the "Vehicle Technology and Advanced Mobile Mobility" Innovation Award at the 2024 CES Consumer Electronics Exhibition

Researchers have implemented a creative approach to reduce stray light using spatial locking technology based on periodic shadows

Guangfeng Technology releases the world's first versatile laser headlights

Dark Solitons Discovered in Ring Semiconductor Lasers