chanelink logo
CHANELINK
简体中文

BWT 969nm semiconductor pump source

17
2025-05-09 11:31:01
查看翻译

Semiconductor laser pump sources, especially those with a wavelength of 969nm, have become the preferred choice for high-power/high peak energy disc lasers due to their reduced quantum losses and heat generation.

The 3000W 969nm fiber coupled semiconductor laser system launched by BWT uses 800 μ m NA0.22 fiber to output flat top optical energy distribution, combining lightweight and excellent optical performance, and can be widely used in scientific research and other fields.

In terms of design, BWT combines six 500 watt modules to achieve a 3000W power output scheme (as shown in the figure below). By adopting CTC chip integration technology, the system has the characteristics of miniaturization and lightweight, with a total size of only 80 * 482 * 521mm ³, a weight of only 24kg, and equipped with QBH output.


Figure 1. Fiber Bundle Output 3000W@969nm Lockwave


The system can achieve an output power of 300-3000W within the current range of 5-30A, with a center wavelength of 969nm and a side mode suppression ratio of over 25dB; When the power reaches 3000W, the edge mode suppression ratio is about 40dB, and the full width at half maximum of the spectrum is less than 0.3nm. To achieve a near flat top distribution of fiber output energy, BWT uses special techniques to improve energy uniformity, and the measured data shows a super Gaussian order greater than 4 (as shown in the figure below).


Figure 2. Power of 3000W semiconductor laser system

 


Figure 3. 3000W 969nm semiconductor laser system


At present, BWT has a full range of semiconductor laser products (380nm-1940nm, 2mW-6kW), with laser pump sources covering the full power range of 10W to 1000W in the 8XXnm and 9XXnm series. In the future, we will launch higher power semiconductor laser systems to meet the demand of disc lasers for amplifying and outputting higher pulse energy in ultrafast lasers.

Source: BWT

相关推荐

  • Sill Optics launches F-Theta lenses for photovoltaic applications

    The energy transformation has brought us global challenges. In this regard, renewable energy sources such as photovoltaic are crucial. The key to improving the efficiency of photovoltaic power generation is to improve the manufacturing process of solar cells. Laser material processing is used to weld individual batteries into modules, dope selective emitters, and remove very thin antireflective an...

    2023-11-22
    查看翻译

  • New Progress: III-V Laser and Silicon Optics Technology Achieve Single Chip High Integration

    Recently, Scientific Photonics, a supplier of silicon photonic integrated circuits (PICs) headquartered in Grenoble, announced that it has successfully integrated III-V-DFB lasers and amplifiers with standard silicon photonic technology into the production process of Tower Semiconductor.By utilizing proprietary technology and standard silicon photonics, Scientific Photonics has achieved full inte...

    2024-03-01
    查看翻译

  • Tianjin University's Photoacoustic Remote Sensing Microscopy Technology Breakthrough New Heights

    Recently, Professor Tian Zhen's team from Tianjin University has made a breakthrough in the field of photoacoustic remote sensing microscopy technology and successfully developed a new type of non-destructive testing method. This technology uses Kaplin high-power femtosecond laser as the key light source, further optimizing the solution to the internal flaw detection limitations of inverted chips,...

    2024-04-16
    查看翻译

  • Researchers develop innovative quantum dot lasers for advanced frequency combs

    Researchers at the University of California, Santa Barbara have made significant breakthroughs in laser technology, introducing a groundbreaking quantum dot mode-locked laser that allows for independent generation of amplitude and frequency modulation combs from a single device. This cutting-edge dual mode laser paves the way for the creation of small-sized and energy-efficient frequency combs for...

    2023-11-17
    查看翻译

  • The INRS camera captures transient events and is suitable for various scenarios such as high-speed LiDAR systems for autonomous driving

    It is reported that the National Institutes of Sciences (INRS) of Canada has developed a camera platform that can achieve cheaper ultra fast imaging through the use of ready-made components, which can be used in various applications.This new device aims to address some of the limitations of current high-speed imaging, including parallax errors and potential damage from pulse illumination. Th...

    2023-10-07
    查看翻译