How can I seperate the drawings so that I can arrange them to maximize my table?

Nugent

2023-07-25

1.1K

1

0

Laser cleaning technology is a new type of clean and environmentally friendly cleaning and processing technology that has emerged in recent years. Its working principle is to use a high energy laser beam to irradiate the surface of the material, so that the irradiated pollutants expand and evaporate, so as to achieve the purpose of removing stains....

Christian

2023-07-25

1.1K

1

0

1. Cylindrical gear driveFor the transmission between parallel shafts, the general transmission ratio can be up to 8, the maximum 20, the two-stage can be up to 45, the maximum 60, the three-stage can be up to 200, the maximum 300. The transmission power can reach 100,000 kW, the speed can reach 100,000 RPM, and the circumference speed can reach 3...

Patrick

2023-07-25

1.1K

1

0

I’m trying to do a test material 10x10 swatch and when the laser tries to “go home” (Homing) it gets to 0 X&Y and doesn’t stop… grinding the motor because it’s buried in the corner.I have a TwoTrees (Sculpfun) S9 laser, or it “found” my laser as GRBL… I haven’t messed with an...

Marshall

2023-07-24

1K

1

0

I’m trying to create a template I can burn out of this photo. I only need the center portion bounded by the four circles. I’ve done an image trace and can’t figure out what to do from there.

Kevin

2023-07-24

1.1K

1

0

Ok, so I recently bought a new home and have moved my laser (60w Chinese omtech) to the utility room. The use is the only outlets in the room are for the sump pump.Bummer…So I am going to run new wiring for a dedicated circuit for the laser and laser equipment. I’m not sure between 15 or 20 amp circuit breaker and wiring. The circuit ...

Aaron

2023-07-24

1.1K

1

0

Can anybody give me a bit of advice please.I recently bought an SVG file(just svg) from Etsy.When I cut the file it would not assemble correctly so I cu another just to satisfy myself that it wasnt working.I contacted the seller and to cut a long story short he says that because I am using Lightburn it will automatically reduce an SVG by at least 2...

Abel

2023-07-24

1.2K

2

0

Trying to make a stencil. Adding the “bridges” to connect the floating pieces.The Subtract Boolean is only working some-times. I made sure to select one object and then the other. I made sure both objects are closed shapes. I made sure all the shapes are turn into paths. I’m sure its some minor detail I’m over looking but I ...

Williams

2023-07-24

1.1K

1

0

In the process of long-term use, the laser chiller needs to be cleaned regularly to ensure its normal operation and the best use effect. The following are several steps to clean the laser chiller:1. Prepare before cleaning. Before cleaning the chiller, we want to make sure that the power of the laser chiller is turned off, and then empty the water...

Smith

2023-07-24

997

1

0

New to working with laser engravers - have design I have imported through LightBurn that works fine on flat surface but will not work with rotary - appears to be cutting but make only a single light at the top. I stopped it after 13 minutes. Have watched and rewatched many videos but now do not know how to address this issue.

Christian

2023-07-22

1K

1

0

I’m using the latest version of lightburn and an xtool d1 pro. For whatever reason, if i try to cut or burn larger shapes, they always become distorted. If I do something say 200x200mm, it measures out exactly and is fine. I’ve done some searching but suspect the terms i’m using are incorrect thus not getting a lot of possible sol...

Patrick

2023-07-22

1.2K

1

0

Why are text letters not solid?

jessie

2023-07-22

1.2K

1

0

Hello,I’m importing vectors from my cnc software but when I try to engrave the vectors with Line Mode, the laser output is very weak, even at 100%. Fill output on vector engraving is good and so is picture engraving. Is vector line engraving weak on purpose in LightBurn?

Liam

2023-07-22

842

1

0

1, motor encoder alarm(1) Fault causes① Wiring error;② Electromagnetic interference;③ encoder hardware damage caused by mechanical vibration;④ Pollution caused by the site environment;(2) Troubleshooting① Check the wiring and eliminate errors;② Check whether the shielding is in place, check whether the wiring is reasonable and solved, and increas...

Jen

2023-07-22

908

1

0

In order to meet the requirements of mechanical equipment for high precision and fast response, the servo motor should have a small moment of inertia and a large locked-rotor moment, and have as small a time constant and starting voltage as possible, and should also have a longer overload capacity. To meet the requirements of low speed and high tor...

John Trant

2023-07-22

887

1

0