CinIonic is a global leader in Barco's company and laser cinema technology. Today, at the SMPTE 2023 Media Technology Summit held in Hollywood, a new Barco laser projector specifically designed for post production was unveiled. As part of the company's award-winning Barco Series 4 laser series, the Barco Series 4 SP4K-P is the first laser projector...
2023-10-19242101. Evaporation pressure and temperatureIn the operation of a chiller, the evaporation temperature, pressure, and heat brought into the evaporator by cold water are closely related. When the cooling load is high, the return water temperature of the evaporator's cold water increases, causing an increase in the evaporator temperature and corresponding...
2023-10-1924110Buongiorno, dopo l’aggiornamento di lightburn alla versione 1.4.03 è sparita la funzione “constant power mode” dall’impostazione dei livelli.Qualcuno sa dirmi come riattivarlo o se è un bug da segnalare?Leggendo altre discussioni mi pare di capire che è una funzione presente in tutte le versioni
2023-10-1927010Hello you all, how are you?Pretty new to laser cutting but familiar with waterjet-cutting and gcode.Cutting speeds are a hot topic resulting in many question especially from newby’s.Here is what I was thinking;Does Lightburn know what the actual cutting speeds are or where by reading the gcode?The gcode should contain the actual speeds for a...
2023-10-1924210Hello!I have issue with my A40630. Trying to cut 4mm Plywood, but it takes 20 passes at full power. Also I am using air assist.Tried focusing. Can anyone help me out?
2023-10-1823610I recently updated my sculpfun s9 with limit switches, following the youtube video provided, i learned that where the laser hits the limit switches and where Lightburn sees the laser, is not the same. Lightburn sees it at being X: -377.00 Y: -392.00 Z: 0.00. Would there be a way to make its current position the new 0,0 ?
2023-10-1829610I’m using a Razor 3 130Watt C02 Laser and I am having trouble with cuts. I am having to use multiple passes to cut through this 3mm particle board, but somehow our 50watt Epilog still is getting cleaner cuts with one pass. I’ve tried running 130Watt at 60/55% power at 35mm/s. To actually cut with the 130Watt laser I’m having to ru...
2023-10-1829820I have my lasers in a a shop with wifi and one in another shop does not have wifi, I take the laptop to each one. Can I request OFFLINE activation on the same computer and use it on and off line? Example, can I bounce back and forth using the wifi or the offline? Or once I get the activation for offline will it mess up my using wifi on that compute...
2023-10-1727910When is use Frame to position my design the Frame size outline is always larger than the design. Yet when I run the file the design is exactly what size Lightburn shows it should be.
2023-10-1724500Help me pleasALARM:2The G-code motion target exceeds the machine travel. Maintain the machine position safely. The alarm can be unlocked. (Right click on the “Devices” button to reset the connection).On or near line 3:I get this error does anyone know about this error?
2023-10-1721710looking to make a door hanger how do i get the pattern into the inside as in pic .confused
2023-10-1624010Hello,I have just cleaned my laser top to bottom but I can’t figure out where this plug is supposed to go. It is a part of the air assist fan, but I don’t see a port for it to plug into.It is a tiny white plug that is on the brushless DC fan. Please help!
2023-10-1622610I am engraving on slate and I have developed a problem. I created the file and run my material test to find the best setting for my 20w Diode Mr. Carve. The first 5 time I ran the engraving there were no issues with filling in all the areas, but on the 6 run I developed a problem filling in the corners. On the 6 run I was adjusting the power level ...
2023-10-1625210Laser chiller is a cooling device used for cooling and constant temperature control. When it cannot maintain a stable temperature, various problems may occur. The following are some possible reasons and solutions that may cause the temperature of the chiller to be unstable. You can refer to them to solve the problems encountered by the chiller duri...
2023-10-1422710Hello,I have a Mira 7 and interested in getting the lightburn camera for it but don’t know which option to choose from the many angles offered. Which one works if I mount in the lid?Thanks,Aaron
2023-10-1425710
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski