If I want to use my PC for other things, including rebooting, disconnecting, etc., while the laser is running, what would my setup look like?Raspberry Pi with Octoprint? Does for example the “Frame” button still work with that? Does it work with the “Ethernet/TCP” connection in LightBurn?There’s probably not enough mem...
2023-11-0894710Hey,ich hab seitdem ich meinen LM3 habe folgendes Problem, das der Laser sporadisch nicht durchschneidet. Bis heute dacht ich es liegt am Holz, an der Struktur oder an der Verleimung.Nun bin ich mir aber nicht sicher ob es vielleicht doch am Laser oder an irgendwelchen Einstellungen zu tun hat.Ich schneide seid Tagen schon das gleiche Muster aus un...
2023-11-0885310HiIm struggling to align laser beam with my new laser tube. each time I successfully align it Im having to do it again after 5 minutes. Any help is much appreciated.for OMTECH 60wThank you
2023-11-0888010Is it possible to speed up an engraving or change the number of passes while it is engraving? Or can that only be done before the engraving starts?
2023-11-0791610I cannot get an image from my new camera that I purchased form YoraHome. Black image only.
2023-11-071.1K10Does anyone have any idea why when I’m trying to cut the second pass it goes off the line?Please look at the attached image:
2023-11-0786910Is it possible to create a macro switch that can be turned on ans assign the switch to park the laser head up and out of the way of where it just finished?This is related to a previous post about me making small 50x50mm round engravings and swapping new ones in.This would be useful for a LOT of things I do.I know with my 3d printer / CURA i can add...
2023-11-061K10I have a 100watt mopa Galvo and its not filling all shapes individually on some designs I noticed this when I traced an image in lightburn and set it to fill individually It still would fill the entire thing at once, I have already tried ungrouping the shapes and still no luck. On version 1.4.03 running on a M1 Max.
2023-11-0680610When I frame a project, the laser comes on frames then shuts off. I’m guessing it’s a setting, but on black or dark projects it leaves a line.Thanks in advance.
2023-11-0388010anyone know where I can find the rear minus front command
2023-11-0389720It works fine with Laser GRBL but not with LB. Can’t find the Com Port. Again, Com 3 on GRBL and no issue - instant connection.
2023-11-0388010Hello.Is there an option to show/hide the icon of the “Set Laser Position”?Everyhting is fine (sort of say), but when I click in the workspace does not show the small icon where the laser is located.
2023-11-0299130Lightburn is not recognizing the console, although I´ve tried several times and several drivers…So my next step in Lightburn, was to install the console manually…One config is a GRBL normal, and the other is a GRBL M3 type…I made 2 engravisngs…One normal, and one M3 type…Same config, even turning on constant...
2023-11-0297410I was working on a simple tutorial to help someone that had 3 elements they wanted to engrave and then have a contoured cut line but using offset instead created 3 separate lines because the items were too far apart.Well I have a fix for this but just keep making the offset larger until it does join then select the offset and offset this inward un...
2023-11-0293910Hi,My machine has a rdc6563f controller an i use rdcutist 3I have worked out most issues but i cannot find how to continiue a cut after a collision.If i have a part stand up and the laser head touchs it , the machine stops and an alarm is then on the screen(collision).It asks to press esc to clear.I clear the alarm and when I then press st...
2023-11-021.1K20
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski