This error happens everytime I power on the laser, I have confirmed by opening the laser that the laser autofocus is working, doing a manual A axis reset works perfectly but as soon as I enable Focus Ctrl in A axis vendor setting I get "A axis reset fail" each time the laser powers on. Can anyone help?Controller : Ruida RDC6563FG-LiteLaser Head : R...
2024-07-2189720Hi, I'm using the Ruida RDC6563 controller for a fiber laser cnc machine with the specifications of a BM110 laser head with auto focus servo. everything is running normally and have done a metal plate cutting test. but there is one issue, the autofocus function on the parameter layer does not work. but servo A axis runs normally on manual jo...
2023-02-181.2K71The maintenance of helical gear reducers is an important measure to ensure their long-term stable operation and extend their service life. The following are some basic points for maintenance and upkeep of helical gear reducers:Regular inspection: Regularly inspect the gearbox, including checking for any abnormal wear, cracks, or leaks on the appe...
2024-07-221.2K00Error 1: When carving fabric, the laser will burn through the materialThe first step in avoiding burning through fabrics when using laser engraving/cutting machines is to understand which fabrics can withstand this process and the temperature they can withstand. Durable fabrics such as denim, canvas, and leather can withstand higher temperatures du...
2024-07-2094010This type of malfunction is mainly caused by the failure of the main circuit control equipment (frequency converter, contactor, soft starter, etc.) to operate. It can be checked whether the main circuit control equipment has received control commands in a timely manner, such as whether the main contactor is engaged, whether the frequency converter ...
2024-07-201K001. Speed controlVariable frequency motors can achieve speed control of the motor by changing the power frequency, meeting different speed and load requirements in the production process. This speed regulation method can accurately control the motor speed, improve production efficiency and quality.2. Energy conservation and consumption reductionVa...
2024-07-19828101. Gear overloadGear overload is a common fault of transmission gears, usually caused by unreasonable mechanical structure design of the transmission device, harsh operating environment, and excessive workload. Gear overload can cause gear cracks, gear tooth surface damage, bearing overload and other faults, which can seriously affect production ef...
2024-07-181.2K00Electric slide table, also known as linear module, linear slide table, linear module, is an automated transmission component that uses synchronous belt or ball screw to drive the slider to move. It is generally assembled from synchronous belt/ball screw, linear guide rail, aluminum alloy profile, ball screw support seat, coupling, motor, photoelect...
2024-07-1792110The correct meshing conditions for helical gears are that the normal modulus of two helical gears is equal, the normal pressure angle of two helical gears is equal, and the helix angle of two helical gears is equal in size and opposite in direction. These conditions are the foundation for the normal operation of helical gears.As a special type of...
2024-07-171K00About how to start a brushless DC motor?
2024-07-161K20What are the lubrication methods for gear reducersGear reducer is a mechanical device that uses various levels of gear transmission to achieve the purpose of speed reduction. If the friction and wear of the gears in the gear reducer are not lubricated, it is easy to cause damage to the mechanical equipment. Therefore, lubrication of the reducer is ...
2024-07-15920101. Power supply not connected: If the power supply is not connected or has poor contact, it will cause the motor to not rotate. At this time, electricians should check the switch, fuse, various contacts, and wiring heads to gradually identify the fault and carry out maintenance;2. When starting, the fuse of the fuse is blown, causing it to not tu...
2024-07-151.3K001. Single phase faultThis situation occurs when any phase of the power supply voltage is lost. This is because the normal operation of a three-phase induction motor requires a three-phase voltage source. Due to this malfunction, the motor may burn out or generate heat.2. Reverse phase sequence faultWhen any phase of the three-phase power supply i...
2024-07-1194810In order to produce highly precise products, the fourth axis accurately defines the motion of the worktable and cutting tools of the machine tool, especially the spatial position of the worktable and cutting tools, using coordinate values, and describes the motion in multidimensional space using digital information.Common fault diagnosis of the f...
2024-07-1196910Laser marking is a very precise processing technology, usually with an accuracy of around 0.1-0.05mm. However, in high-end fields such as medical devices, integrated circuits, and semiconductors, such accuracy is still insufficient. Some tasks with higher processing requirements may require higher accuracy, such as accuracy below 0.05mm. In order t...
2024-07-0995610
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski