I am having some problems with the noise and grinding from the x-axis. Soundls like mad cow disease! I am using an 17HS24-2104S STEPPER with a DM542T driver. Can not find a smooth setting. Per sepperonline I have added a resonance mount with rubber cushion and it is a considerable amount quieter but still bad.
04-021K40Hello,I have a big question.My laser is Atomstack A20 Pro.Due to the laser consistently displaying alarm 8, I rewired it, but this did not help as the laser still displayed error message alarm 8. The laser circled around the project I wanted the laser for, but did not return to zero.
03-2766360Everything I’ve been doing has been with a diode laser and now have recently purchases a Haotian 5W UV Galvo laser. I am using Lightburn with the latest updated version. The learning curve is kind of steep but am having good results thus far. The orientation of the file to the laser is 90 degrees off. The pics show what I have in the setting, what ...
04-0295320We have machine settings that work in ‘normal’ mode and another set of machine settings that work with a rotary. Is there a way to force a machine setting load via the command line or some other fashion so that the less educated user and start a batch file and get the correct setting for the configuration?
04-0792910Dear all,I am experiencing an issue when engraving text using RDWorks. Specifically, when I engrave multiple sentences, the machine does not engrave the text in the correct order. Instead, it seems to engrave partial letters from each sentence at once, followed by the remaining letters individually.I have tried adjusting various settings, inclu...
04-0579310The laser welding speed directly affects the formation of the weld seam, welding strength, and the size of the heat affected zone. Appropriate speed can ensure good weld quality and welding strength, and too fast or too slow speed may lead to a decrease in welding quality.Laser welding, as an efficient and precise welding technology, has been wid...
04-0798902I use a laser on my CNC router. I disassemble the spindle and mount the laser. In this case, a certain offset appears on the laser, which I measured and added to the device setting. Everything is fine when I go to the offset engraving works flawlessly. When I try framing, I have the exact offset that I added in the device setting instead of matchin...
03-2777750Reasons for Material Deformation in Laser Welding1. Thermal stressLaser welding is the process of melting and connecting materials at high temperatures, resulting in structural changes. During the cooling process of materials, internal stress is generated due to different cooling rates in different parts, resulting in material deformation.2. Residu...
03-3183321Chanelink Authority File on Design Section GuidelineBoost Designers for Efficient Creation and Commercial RealizationOverviewAs the Design section continues to develop and improve, more and more users are joining this vibrant creative community. In order to help each designer achieve the leap from creation to commercial value, Chanelink has care...
03-311K02Permanent magnet synchronous AC servo motor, as an efficient and high-performance motor type, plays a crucial role in modern industrial automation and many application fields. The following is an introduction to the application fields of servo motors:Industrial automation1. Production line automation: In the field of industrial automation, perman...
03-3188000I have an Atomstack A5 Pro equipped with a 5W laser. The problem I encountered is that when carving or cutting, the laser stops for a few milliseconds and the carving leaves burnt spots at the stop. Can you help me? What happened?
03-2487440Dear Sir,We have an RDC6445S working in a LaserSaur machine, the cutting file come from RDWorks through USB cable.If we place a speed of 100 mm/s in RDworks, the file receive by RDC6445S shows on the screen a speed of 100 mm/s, but the working speed is only 100/5 = 20 mm/s.At the same time, if we tranfer laser head at a 100 mm/s speed (visible o...
02-191.6K90Having a super hard time getting this image engraved on black slate. I have tried everything. Tracing Image, Removing background, Inverting, Negative etc.and no matter what I do I can not get the face to engrave. It alway engraves the eyes and the lips but not the reverse.
03-251.1K20I want to make a rhombus (4 sides all equal in length) but not with 90 degree corners. I want a “star” shape with 2 120 degree angles and 60 degree angles.
03-2586920Hello friends, I have a problem with my Laser Atomstack S20Pro 20w - Blue laser. The laser does not engrave at power up to 0-20% and also does not engrave at speeds above 3000mm/m.-20000mm/m. For a better understanding, I created an engraving test. Birch plywood MDF 4mm is used. The task is completed normally. It does not report any errors. I am us...
03-2094440
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski