Tiếng Việt

The LiDAR SLAM navigation system uses laser sensors to realize real-time 3D mapping of the environment

784
2023-09-11 15:01:14
Xem bản dịch

Robotic lawn mowers are becoming increasingly popular due to their convenience and ability to save time and effort. Although robotic lawnmowers have made significant progress over the years, many robots still require users to lay perimeter wires to define the mowing area and remove any obstructions from the lawn to ensure the mower doesn't get stuck or damaged.

Well, that's not the case with the Neomow X robotic lawn mower. Developed by Hong Kong-based company Hookii, the Neomow X is the first innovative robotic lawnmower equipped with an advanced LiDAR SLAM navigation system.

Neomow's advanced LiDAR SLAM navigation system uses laser sensors to enable real-time 3D mapping of the environment. LiDAR SLAM Precision Navigation takes on the task of navigating the lawn with unparalleled precision, ensuring that every square inch is carefully mowed. With this cutting-edge technology, Neomow X can easily cope with challenging lawn conditions and is not affected by light or signal interference.

The robot lawnmower integrates a 360° LiDAR module and an intelligent obstacle avoidance system, which can detect and avoid obstacles in all directions, and independently plan avoidance routes. It also has a wide-angle front bumper for additional protection.

It features a patented stylish design with embedded blades and a cut-out disc that prevents grass clippings from clogging the disc.

In addition, the new mower is also equipped with intelligent automatic charging function, when the battery is low, Neomow can automatically return to the charging station. After charging, it picks up where it left off last time. Charging stations can be installed indoors or outdoors according to your preference.

The Neomow X has a 234Wh lithium battery that provides up to 120 minutes of mowing time, and the Neomow X pro has a 315Wh battery that lasts up to 180 minutes.

The robot uses a front-wheel drive system that helps it move smoothly on any terrain. In addition, the mower has a 45-degree climb capability and an IPX5 waterproof rating to mow lawns in any weather. Neomow X operates at noise levels below 60dB during the day and at night without compromising the peaceful environment.

The mower can be customized with the Hookii app, allowing you to easily personalize mowing preferences, set schedules, and monitor progress from your smartphone. The app can also be used to choose between four different mowing modes, set the height of the floating cutting disc, adjust the mowing Angle for each task, or track the GPS coordinates of a device if it is stolen.

In addition, Neomow X offers multiple connectivity options, including 4G, Wi-Fi, and Bluetooth, for easy remote control, configuration, and location monitoring.

The Neomow X and Neomow X Pro are only available on Kickstarter and start at $1,199 and $1,499, respectively.

Source: Laser Network

Đề xuất liên quan
  • Mycronic receives first order after upgrading solid-state lasers

    Recently, Mycronic AB received its first order from SK Electronics in Japan to upgrade the installed display mask writer from a gas laser to a solid-state laser. The upgrade is scheduled to be delivered within the next two years.Image source: MycronicIt is reported that Mycronic's "Pattern Generators" department provides mask writers for display manufacturing and semiconductor production. So far, ...

    2023-10-16
    Xem bản dịch
  • Researchers have placed photon filters and modulators on standard chips for the first time

    Researchers at the University of Sydney combined photon filters and modulators on a single chip, enabling them to accurately detect signals on the broadband RF spectrum. This work brings photonic chips closer to one day, potentially replacing larger and more complex electronic RF chips in fiber optic networks.The Sydney team utilized stimulated Brillouin scattering technology, which involves conve...

    2023-12-26
    Xem bản dịch
  • The application of lasers in material processing has driven industrial progress in Santa Catalina state

    Laser material processing has been widely used in advanced industries, ranging from designing and producing lightweight, ultra wear-resistant parts and equipment with complex geometric shapes to repairing damaged or worn components through technologies such as 3D printing of deposited metal powders or deposits.Use laser pulses for surface treatment to prevent fatigue. But the impact of such techno...

    2023-09-26
    Xem bản dịch
  • Dr. Gu Bo, a renowned expert in the laser industry, has been elected as a member of the Canadian Academy of Engineering

    On May 7, 2024, the official website of the Canadian Academy of Engineering announced that Dr. Gu Bo, a renowned expert in the laser industry, has been elected as a member of the Canadian Academy of Engineering.Dr. Gu BoAcademician of the Canadian Academy of EngineeringFounder/President of Bose Photonics, USADr. Gu Bo is recognized as a pioneer and academic leader in the global field of fiber lase...

    2024-05-07
    Xem bản dịch
  • EV Group launches EVG 850 NanoClean system for ultra-thin chip stacking for advanced packaging

    EV Group, a leading supplier of wafer bonding and lithography equipment in the MEMS, nanotechnology, and semiconductor markets, yesterday launched the EVG850 NanoClean layer release system, which is the first product platform to adopt EVG's revolutionary NanoClean technology.The EVG850 NanoClean system combines infrared lasers with specially formulated inorganic release materials, and can ...

    2023-12-08
    Xem bản dịch