Tiếng Việt

Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopy imaging

359
2024-09-09 16:34:45
Xem bản dịch

Recently, the State Key Laboratory of Transient Optics and Photonics Technology of Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopic imaging, and the research results were published online in the international high-level academic journal Opto Electronic Advances (IF: 15.3). The first author of the paper is Tian Xuan, a 2024 doctoral candidate of Xi'an Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, and Li Runze, a special research assistant. The corresponding authors are Associate Researcher Bai Chen and Researcher Yao Baoli.

The phase information carried by light waves can reveal the thickness, refractive index, geometric morphology, and other characteristics of matter. As it cannot be directly sensed by optical sensors, interference methods are usually required for detection. Digital in-line holographic microscopy (DIHM) has become a commonly used method for quantitative phase imaging due to its high spatial bandwidth product, label free, non-invasive, and fast imaging speed. However, in practical applications, the interference of twin images during holographic reconstruction and the loss of sub-pixel information caused by the use of large pixel size detectors can hinder high-quality DIHM imaging. Deep learning, with its noise suppression and inverse problem solving capabilities, has become a powerful tool for DIHM imaging and pixel super resolution (PSR). However, most current deep learning based methods rely on supervised learning and training instances to optimize their weights and biases. Collecting a large number of holograms and their corresponding high-resolution raw phase maps is not only time-consuming in experiments, but also very difficult to collect training data. In addition, the trained model has very limited generalization to samples that are different from the training data.

Figure MPPN-PSR phase imaging: (a) Full field pixel super-resolution phase imaging of TOMM20 antibody cells, (b) Comparison of different PSR phase reconstruction methods, and (c) corresponding optical thickness maps.

In response to the above issues, the research team proposed a non trained neural network for DIHM pixel super-resolution phase imaging, namely the Multi Prior Physical Enhancement Neural Network (MPPN-PSR), which can reconstruct phase information of samples from coaxial holograms with high throughput, high accuracy, and high resolution. MPPN-PSR combines neural networks and physical models, encapsulating physical model priors, sparsity priors, and depth image priors in an untrained deep neural network. This avoids the need for a large amount of training data for neural networks and does not require any additional hardware design. It can achieve twin image suppression, pixel super-resolution, and high-throughput phase imaging with only a single hologram. Compared with the phase recovery method without PSR, the MPPN-PSR method increases the pixel resolution of the image by three times. Compared with the classic phase recovery method Twist TV-PSR that combines pixel super-resolution, the optical resolution is increased by about two times. Moreover, due to the use of the inherent large field of view of the low magnification objective lens, MPPN-PSR improves the spatial bandwidth product of the imaging. This research result is expected to provide reference for other digital holographic imaging schemes and be widely applied in the fields of biomedical and industrial measurement.

In recent years, the Yao Baoli team of the State Key Laboratory of Transient Optics and Photonics Technology has conducted in-depth research on intelligent optical microscopic imaging technology, and formed a variety of new optical microscopic imaging technologies, which have achieved significant improvements in imaging functions, information acquisition dimensions, performance indicators, etc., including three-dimensional imaging of full-color wide field micro light slices, fast super resolution three-dimensional imaging of confocal microscopy, fast three-dimensional microscopic imaging of light slices, etc., as well as high-resolution and high signal noise ratio microscopic imaging of light slices, computational imaging through scattering media, etc., which are achieved using compression sensing technology. The relevant research results were published in Photon Journals such as Res, Opt Lett, Opt Express, etc. In addition, the team has conducted long-term theoretical and experimental research on optical microscopy imaging and optical micro manipulation based on light field regulation. They have published more than 300 papers in journals such as PNAS, Nature Com., PRL, Rep. Prog. Phys., Adv. Opt. Photon. They have been granted multiple national invention patents and have won awards and honors such as the first and second prizes of Shaanxi Provincial Science and Technology Innovation Team and Shaanxi Provincial Key Science and Technology Innovation Team.

Source: Opticsky

Đề xuất liên quan
  • Coherent lasers will help expand the scale of fusion tokamaks

    Coherent company's excimer lasers can be more widely used in fusion reactor applications, after the US based photonics giant signed a "letter of intent" with Japan's Faraday 1867 Holdings.Faraday 1867, headquartered in Kanagawa Prefecture, is said to have become the world's leading manufacturer of high-temperature superconducting (HTS) tape through its subsidiary Faraday Japan factory.This tape is...

    2023-10-11
    Xem bản dịch
  • Tokyo Institute of Technology collaborates with EX Fusion to promote laser fusion energy closer to commercialization

    Recently, Tokyo Institute of Technology and EX Fusion established a collaborative research group focused on promoting liquid metal equipment to achieve commercial laser fusion reactors. The two sides held an official signing ceremony in Tokyo on October 11th, marking the official start of their cooperation.The EX Fusion Liquid Metals Collaborative Research Group was established with the support of...

    2023-10-17
    Xem bản dịch
  • IoTech shapes the flexible future of 3D printed electronic products

    The rapidly developing IoTech enterprise headquartered in Israel will showcase at LOPEC 2024 how its disruptive digital manufacturing continuous laser assisted deposition technology shapes the future of microelectronics and additive manufacturing.Herv é Javice, co-founder and CEO of ioTech, commented, "We are delighted to be attending the LOPEC exhibition for the first time and showcasing ...

    2024-02-27
    Xem bản dịch
  • Zhejiang University has prepared ultra strong and tough 3D printing elastic materials

    Professor Xie Tao and researcher Wu Jingjun from the School of Chemical Engineering and Biotechnology at Zhejiang University have designed a new type of photosensitive resin and used it to create a "super rubber band" that can stretch to over 9 times its own length and lift 10 kilograms of objects with a "body" with a diameter of 1 millimeter through 3D printing. The relevant results were recently...

    2024-07-06
    Xem bản dịch
  • Scientists propose new methods to accelerate the commercialization of superlens technology

    Superlenses are nano artificial structures that can manipulate light, providing a technique that can significantly reduce the size and thickness of traditional optical components. This technology is particularly effective in the near infrared region, and has great prospects in various applications, such as LiDAR, which is called "the eye of autonomous vehicle", mini UAV and blood vessel detector.D...

    2024-03-29
    Xem bản dịch