Tiếng Việt

First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

349
2024-05-07 16:45:29
Xem bản dịch

Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm figure-9 ultrafast laser with all fiber structure".

Laser with a wavelength around 900 nm is highly favored in the field of optical measurement due to its high responsiveness on silicon-based detectors. The low repetition rate fiber laser in this band can effectively reduce distance ambiguity in Time of Flight (TOF), and has the characteristics of good beam quality, compact structure, and long-term stability, making it an ideal light source for space detection. However, due to the strong dispersion and nonlinear effects of single-mode fibers, it is difficult for lasers to achieve single pulse operation in long fiber cavities. Therefore, the repetition frequency of traditional mode-locked fiber lasers is usually limited to tens to hundreds of MHz.

In response to the above issues, researchers have proposed a low repetition rate fully polarized nine cavity fiber laser with a central wavelength of 915 nm. By designing and optimizing the laser structure, high-energy single pulse output was achieved at low repetition rates. The optimized seed was amplified in one stage to obtain a pulse output with a pulse width of 15.2 ps and a single pulse energy of 4.7 nJ at a repetition frequency of 3.1 MHz. The mode locking performance of the laser has been confirmed through long-term power and spectral stability tests. This compact and long-term reliable fiber laser is a promising light source for future space laser ranging.

This work was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences, the National Natural Science Foundation of China, and the Shanghai Natural Science Foundation.

Figure 1. Experimental setup diagram of a 915 nm low repetition rate fully polarization maintaining nine cavity fiber laser

Figure 2. Long term stability testing of output power and spectrum, and output characteristics of pulses in frequency and time domains

Source: Yangtze River Delta Laser Alliance

Đề xuất liên quan
  • The research team of Xi 'an Jiaotong University and Northwestern Polytechnical University proposed a new technology of laser cutting water to provide a new idea for the application of "water"

    Water is a natural resource that human beings depend on for survival and is used in many fields. In recent years, the patterning and flow control of trace water have attracted wide attention in materials science, chemistry, biomedicine and other fields."Draw the knife to cut off the water more flow"? No, it's "Laser cut water pattern"! On September 1, the reporter learned that Xi 'an Jiaotong Univ...

    2023-09-05
    Xem bản dịch
  • Focused Energy purchases two world-class high-energy lasers

    Recently, Focused Energy, a well-known foreign fusion energy startup, announced that it has officially signed an agreement to purchase two of the world's top high-energy lasers. These two large lasers will be deployed in the company's upcoming factory in the San Francisco Bay Area in the next two years.Scott Mercer, CEO of Focused Energy, stated, "These lasers are currently the highest average pow...

    2024-12-25
    Xem bản dịch
  • French laser giant's profits decline, laser radar business restructuring

    Recently, Marvel Fusion, a pioneer in the field of laser fusion, successfully raised 62.8 million euros (approximately 70.3 million US dollars) in funding. This funding will provide strong impetus for its fusion technology demonstration on existing laser equipment and accelerate the comprehensive technology validation process at its facility in Colorado, with the goal of achieving this milestone b...

    2024-10-09
    Xem bản dịch
  • Progress in Laser Physics: Reducing Residual Amplitude Modulation for Accurate Measurement

    Driven by the pioneering work of scientists such as John Young Hall, significant progress has been made in precision measurement in the field of laser physics. His contribution to laser frequency stability and precise measurement using lasers has led to groundbreaking techniques that significantly reduce residual amplitude modulation.John Hall's research focuses on understanding and manipulating s...

    2024-03-18
    Xem bản dịch
  • Swedish KTH develops 3D printed quartz glass micro optical devices on optical fibers

    In what has been described as the "first communication", Swedish researchers conducted 3D printed quartz glass micro optical devices on the tip of optical fibers. They said that this progress could lead to faster Internet and better connectivity, as well as innovations such as smaller sensors and imaging systems.Scientists from the KTH Royal Institute of Technology in Stockholm have stated that co...

    2024-05-23
    Xem bản dịch