chanelink logo
CHANELINK
Tiếng Việt

BMW uses WAAM 3D printing to optimize derivative designs

738
2024-04-13 13:45:50
Xem bản dịch

BMW explained how to use WAAM (Arc Additive Manufacturing) starting from 2025 to manufacture lighter and stronger automotive components and reduce waste generation, in order to optimize the use of generative design tools.

The demonstrated WAAM process uses aluminum wire raw materials directly deposited through laser welding heads, enabling automotive companies to manufacture lighter and more robust parts than similar large parts.

BMW stated that in order to optimize the parts manufactured using this technology, the combination of manufacturing processes and general new component design is crucial. To this end, BMW is accelerating the use of generative design and working closely with interdisciplinary teams to develop its own algorithms, partially inspired by the natural evolution process.

Karol Virsik, Head of Vehicle Research at BMW Group, said, "What is impressive is how WAAM technology has evolved from research to a flexible tool that can be used not only for testing components, but also for mass production of components." "The use of generative design methods allows us to fully utilize design freedom, thus fully utilizing the potential of technology. Just a few years ago, this was unimaginable."

Although these components have wide welds, BMW engineers have proven that WAAM components can still be used for high loads without the need for precision machining of surfaces.

Since 2021, BMW has been testing this DED process at its additive manufacturing park in Oberschlei ß heim, Germany, where the first batch of components will be produced. BMW expects to increase production in other locations by using existing assembly lines with new software.

BMW stated that the adoption of WAAM technology will not replace SLS technology for more refined parts, but arc additive manufacturing technology is "superior" in terms of possible size and deposition rate of parts.

The company is even considering using WAAM technology to directly produce individual components on assembly lines, as this technology does not require new tools and only requires software changes to manufacture different components.

Source: NetEase Network

Đề xuất liên quan

  • Mazak will showcase high-speed fiber lasers on Tube 2024

    Yamazaki Mazak designed the FT-150 fiber laser tube processing machine for high-speed cutting of small and medium-sized diameter pipes, for use in Tube 2024. The machine tool will be controlled by a new type of pipe cutting CNC, which will be exhibited for the first time in Europe.Tube 2024 will be held from April 15th to 19th in Dusseldorf, Germany. Mazak will be exhibited at booth C17 in Hall 5....

    2024-03-16
    Xem bản dịch

  • Process practice of blue light semiconductor laser cladding copper on copper

    Laser Cladding, also known as laser cladding or laser cladding, is a method of adding cladding material to the surface of the substrate and using a high-energy density laser beam to melt it together with the thin layer on the surface of the substrate. It forms a metallurgical bonded additive cladding layer on the surface of the substrate, which can be used for surface strengthening and defect repa...

    2024-04-09
    Xem bản dịch

  • Bodor Laser: Laser Cutters Rank First in Global Sales for Six Consecutive Years

    On February 27, at Bodor Laser's global headquarters base in Licheng District, Jinan City, three automated production lines were operating at full capacity, struggling to meet the overwhelming demand. Lu Guohao, Secretary of the Board and Director of the President's Office at Bodor Laser, revealed that the company's laser cutter shipments exceeded 8,000 units in 2024, securing the top spot in glob...

    03-10
    Xem bản dịch

  • Electron beam welding process for thick steel plate of turbine at Aachen Institute of Technology in Germany

    Researchers from the Welding Research Institute of Aachen University of Technology in Germany reported on the development of a stable welding process for electron beam welding of thick plates used in the construction of offshore wind turbines. The relevant research results were published in Materials Science and Engineering Technology under the title "Development of a robust welding process for el...

    2024-07-09
    Xem bản dịch

  • South Korean DE&T will open new subsidiaries in the United States and Canada

    Recently, DE&T, a South Korean manufacturer of secondary batteries and display laser equipment, announced that the company will further expand its overseas business by opening new subsidiaries in the United States and Canada. According to its claim, this move is to carry out maintenance services for laser equipment locally. As of now, DE&T's overseas subsidiaries have increased from two to...

    04-08
    Xem bản dịch