Tiếng Việt

Unlocking visible femtosecond fiber oscillators: progress in laser science

569
2024-03-28 14:05:34
Xem bản dịch

The emergence of ultrafast laser pulses marks an important milestone in laser science, triggering astonishing progress in a wide range of disciplines such as industrial applications, energy technology, and life sciences. Among various laser platforms that have been developed, fiber optic femtosecond oscillators are highly praised for their compact design, excellent performance, and cost-effectiveness, and have become one of the mainstream technologies for femtosecond pulse generation.

However, their working wavelengths are mainly limited to the infrared region, ranging from 0.9 to 3.5 μ m. This in turn limits their applicability in many applications that require visible wavelength light sources. For a long time, expanding compact femtosecond fiber oscillators to new visible light wavelengths has been a challenging but eagerly pursued goal in laser science.

Currently, most visible light fiber lasers use rare earth doped fluoride fibers, such as Pr3+, as effective gain media. Over the years, significant progress has been made in the development of wavelength tunable, high-power, Q-switched, and mode-locked visible light fiber lasers.

However, despite significant progress in the near-infrared field, achieving femtosecond mode locking in visible light fiber lasers remains a highly challenging task. This challenge is attributed to insufficient development of ultrafast optical components for visible light wavelengths, limited availability of high-performance visible light modulators, and extremely normal dispersion encountered in visible light fiber laser cavities.

Recent attention has been focused on near-infrared femtosecond mode-locked fiber oscillators using phase biased nonlinear amplification ring mirrors. PB-NALM eliminates the need for accumulated phase shift in long cavity fibers.

This innovation not only promotes tuning flexibility and long-life operation, but also provides the opportunity to manage intracavity dispersion in a larger parameter space, from normal dispersion state to abnormal dispersion state. Therefore, it is expected to promote the breakthrough of direct femtosecond mode locking in visible light fiber lasers and push fiber femtosecond oscillators towards the visible light band.

According to reports, researchers from the Fujian Key Laboratory of Ultra Fast Laser Technology and Applications at Xiamen University have recently developed a visible light mode-locked femtosecond fiber oscillator and amplifier.

The fiber optic femtosecond oscillator emits red light at 635 nm and adopts a 9-shaped cavity configuration. It uses double clad Pr3+doped fluoride fibers as visible light gain media, adopts visible light wavelength PB-NALM for mode locking, and utilizes a pair of customized high-efficiency high channel density diffraction gratings for dispersion management. The visible self starting mode locking established by PB-NALM directly generates red laser pulses with a pulse duration of 199 fs and a repetition rate of 53.957 MHz from the oscillator.

Accurate control of the spacing between grating pairs can switch the pulse state from dissipative or stretching pulse solitons to traditional solitons. In addition, the chirped pulse amplification system built together with the oscillator greatly improves laser performance, achieving an average output power of over 1 W, a pulse energy of 19.55 nJ, and a pulse duration of 230 fs.

Professor Luo Zhengqian, Director of the Department of Electronic Engineering at Xiamen University, said, "Our research results represent a solid step towards high-power femtosecond fiber lasers that cover the visible spectrum region and may have important applications in industrial processing, biomedical research, and scientific research.".

The author expects that their new solution for generating high-performance visible light femtosecond fiber lasers will lay the foundation for applications such as precision processing of special materials, biomedical, underwater detection, and optical atomic clocks.

Source: Laser Net

Đề xuất liên quan
  • Zhongke Yuchen laser welding technology opens up vast space for the welding process of new energy vehicle motors

    The application of laser welding technology in the welding process of new energy vehicle motors is a typical example of Zhongke Yuchen in many welding cases. The main accessories of the automatic laser welding equipment for new energy vehicle motors are imported products, and the welding process is mature and stable.Motor rotorMotor statorLaser welding of motor stator tapThe circumferential wel...

    2023-10-18
    Xem bản dịch
  • What are double- and triple-stack hybrid stepper motors

    Of the three primary stepper motor designs — permanent magnet, variable reluctance, and hybrid — hybrid stepper motors are arguably the most popular in industrial applications, combining the best performance characteristics of permanent magnet and variable reluctance types.Hybrid stepper motors are constructed with a rotor made of two sections, or cups, with a permanent magnet between ...

    2023-09-16
    Xem bản dịch
  • In situ bubble point measurement using spectroscopy

    Develop and research a new downhole bubble point pressure measurement technology suitable for black oil and volatile oil to enhance well analysis using spectroscopy.Representative fluid characteristics are required for a wide range of oilfield lifespans, such as the initial scale and production planning of reservoir hydrocarbon reserves. Fluid characteristics are usually obtained from laboratory s...

    2024-01-31
    Xem bản dịch
  • Westlake University has made significant breakthroughs in the field of flexible stacked solar cells

    Recently, the team led by Wang Rui from the Future Industry Research Center and the School of Engineering at Xihu University has made significant breakthroughs in the field of flexible stacked solar cells. They have successfully stacked perovskite and copper indium gallium selenide materials together, resulting in a photoelectric conversion efficiency of 23.4%. The related research paper was recen...

    02-05
    Xem bản dịch
  • TRUMPF helps upgrade the automation of 3D laser processing for automotive thermoforming

    (Dechengen, Germany, March 24, 2025) - TRUMPF Group in Germany has now provided end customers with a fully automated one-stop solution for laser processing systems. With this solution, customers can not only shorten the production cycle, but also effectively reduce the cost of 3D laser material processing. Our laser equipment has excellent production efficiency. Now, through the automation upgrade...

    04-02
    Xem bản dịch