Tiếng Việt

New Progress in Research on Three Lattice Photonic Crystal Surface Emission Lasers at Changchun Institute of Optics and Mechanics

402
2024-03-15 13:54:26
Xem bản dịch

Recently, Tong Cunzhu, the research team of the Chinese President of Science, Chunguang Institute of Mechanical Mechanics, made important progress in the research field of photonic crystal surface emitting lasers (PCSEL), proposed a three lattice structure and achieved a low threshold 1550nm PCSEL. Relevant achievements were published in Light: Science and Application vol.13, 442024, and the famous international semiconductor industry publication Semiconductor Today cited "Triple lattice photo crystal laser" A news feature report was conducted on the achievement under the title.

"The 1.55 micron range of light transmission through optical fibers has the minimum loss and the advantage of high power safety for the human eye. However, traditional lasers have poor performance due to high inter band absorption in this range. The PCSEL structure can provide strong optical feedback to overcome this problem, reduce the threshold, and improve output power."

Semiconductor Today is headquartered in the UK and is a well-known international magazine and website in the semiconductor industry. It focuses on reporting on important research progress and the latest industry trends in the international semiconductor field, and has a strong industry influence.

PCSEL is currently an important research direction in the field of semiconductor lasers, which can be widely applied in various technical fields such as communication transmission, laser pumping, optical sensing, medical equipment, etc. It is defined as the core root technology by well-known leading companies in the industry. However, due to the large device size and high threshold current, the current PCSEL cannot meet the practical application needs in fields such as high-speed optical communication. This work proposes for the first time the use of a three lattice photonic crystal structure to enhance the optical feedback in the resonant cavity, and based on this, a work on 1.55 has been prepared μ The continuous pumping of InP based PCSEL in the m-band provides a new approach for reducing the size of photonic crystal cavities and lowering device thresholds. It will play an important role in applications such as high-speed optical communication and LiDAR in the future.

Structure and performance of a three lattice photonic crystal surface emitting laser



Source: Sohu

Đề xuất liên quan
  • The influence of post-processing methods on the fatigue performance of materials prepared by selective laser melting

    Researchers from Opole University of Technology in Poland have reported the latest progress in studying the effect of post-processing methods on the fatigue performance of materials prepared by selective laser melting (SLM). The related research was published in The International Journal of Advanced Manufacturing Technology under the title "Influence of post processing methods on fatigue performan...

    01-17
    Xem bản dịch
  • Nat. Commun.: Two color orthogonal polarized organic light-emitting diode

    In recent years, linearly polarized organic light-emitting diodes have greatly enriched the application scenarios of polarization optics and optoelectronics industries. The low-cost and large-area preparation of linearly polarized organic light-emitting diodes with high polarization, strong directional emission, narrow bandwidth, and multi-color adjustability is an important challenge in the curre...

    2024-02-29
    Xem bản dịch
  • Microcomb launches a simplified design for powerful lasers based on chips

    Researchers at the University of Rochester have created new micro comb lasers that go beyond previous limitations and have simple designs suitable for various applications. The research results are published in Nature Communications.Optical frequency combs are optical measurement instruments that have revolutionized atomic clocks, spectroscopy, metrology, and other fields. However, the difficulty ...

    2024-05-25
    Xem bản dịch
  • The Trends and Challenges of the Metal 3D Printing Industry in 2025

    In the past decade, metal 3D printing technology has experienced rapid development, from the initial production of orthopedic implants to the manufacturing of rocket boosters. This technology has become an indispensable part of multiple key industries. With the advancement of technology and the expansion of the market, we are witnessing the revival of electron beam melting (EBM) technology and the...

    01-21
    Xem bản dịch
  • IoTech shapes the flexible future of 3D printed electronic products

    The rapidly developing IoTech enterprise headquartered in Israel will showcase at LOPEC 2024 how its disruptive digital manufacturing continuous laser assisted deposition technology shapes the future of microelectronics and additive manufacturing.Herv é Javice, co-founder and CEO of ioTech, commented, "We are delighted to be attending the LOPEC exhibition for the first time and showcasing ...

    2024-02-27
    Xem bản dịch