Tiếng Việt

Researchers use laser doping to enhance the oxidation of IBC solar cells

915
2024-02-20 14:09:58
Xem bản dịch

Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.

Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar cells through laser doping processes.
The team found that this led to more effective patterning and also served as a protective layer for further manufacturing steps. This provides potential for expanding manufacturing scale and achieving commercialization of solar energy technology.

The new method utilizes the enhanced oxidation performance of phosphate glass layers in the local laser doped region with high phosphorus concentration. This method is expected to make these cells more efficient.
Since the development of the first batch of IBC batteries in the early 1970s, they have been widely used as the back or non lighting side of solar cells.

Compared to traditional double-sided contact solar cells, the advantage of IBC cells is that they eliminate any optical shadow loss caused by the metal fingers and busbars on the front. This makes solar cells have a higher short-circuit current density and reduces the complexity of battery interconnection within the module.

Therefore, a more comprehensive front surface texture and light capture scheme can be used on the front surface of the IBC structure. This design architecture makes it the perfect component for mechanically stacked batteries using higher bandgap technology.

The Fraunhofer Solar Systems Research Institute, headquartered in Germany, also achieved a record 26% conversion efficiency of double-sided contact silicon solar cells in 2021. Due to its low complexity, it is favored in industrial production.
Last September, researchers from the Fraunhofer Solar Energy Institute ISE and NWO Institute AMOLF also developed a multi junction solar cell with an efficiency of a record breaking 36.1%. This method stacks multiple layers of absorbing materials together, allowing each layer to effectively capture specific parts of the solar spectrum.

Source: Laser Net

Đề xuất liên quan
  • Research progress and prospects of CFRP laser surface cleaning

    Researchers from Materials Science at Harbin Institute of Technology, Zhengzhou Research Institute at Harbin Institute of Technology, and Key Laboratory of Microsystems and Microstructure Manufacturing at Harbin Institute of Technology, Ministry of Education, reviewed and reported on the research progress of laser surface cleaning of carbon fiber reinforced polymer composites (CFRP). The relevant ...

    03-06
    Xem bản dịch
  • LiDAR solutions provider Cepton acquired by KOITO

    On July 29, 2024, Cepton, a provider of high-performance LiDAR solutions, announced the signing of the final agreement for its acquisition, making it the acquiring company's subsidiary in the United States.Image source: CeptonAccording to the agreement, the acquirer is the internationally renowned automotive lighting giant KOITO, which was established in 1915 and has a history of over a hundred ye...

    2024-08-01
    Xem bản dịch
  • Laser cladding method improves the surface performance of parts

    Laser cladding, also known as laser metal deposition, is a process of depositing one material onto another.When the laser beam scans the target surface, metal powder or wire flow is fed into the molten pool formed by the laser beam, thereby producing the required material coating.The laser cladding method improves the surface properties of the parts, such as wear resistance, and allows for the rep...

    2023-12-28
    Xem bản dịch
  • Experimental verification of driving pressure enhancement and smoothing for hybrid driven inertial confinement fusion on a 100 kJ laser device

    The research teams from the Laser Fusion Research Center of the Chinese Academy of Engineering Physics, the Beijing Institute of Applied Physics and Computational Mathematics, Peking University, and Shenzhen University of Technology reported experimental verification of the driving pressure enhancement and smoothing of hybrid driven inertial confinement fusion on a 100 kJ laser equipment.The relev...

    2023-09-25
    Xem bản dịch
  • Observation of laser power changes in ultrafast protein dynamics

    When researchers at the Max Planck Institute of Medicine conducted their first ultrafast X-ray crystallographic experiment on myoglobin in 2015, they were not aware that they had conducted the wrong experiment. By increasing the power of X-ray free electron lasers to ensure usable diffraction patterns, lead researcher Ilme Schlichting said that they "suddenly entered the wrong [excited] state with...

    2024-02-28
    Xem bản dịch