Tiếng Việt

Juguang Technology launches miniaturized high-power semiconductor laser stack GS09 and GA03

883
2023-12-15 14:13:47
Xem bản dịch

In today's technology field, Juguang Technology released two highly anticipated high-power semiconductor lasers on December 13th: GS09 and GA03. These two products are leading the innovation wave in the laser industry with their miniaturized design, excellent thermal management capabilities, and extensive customization flexibility.

GS09 revolutionizes chip spacing by compressing the width of the stacked light emitting region from 0.73mm to 0.43mm, supporting up to 10 bar of chip count and achieving an astonishing 1000W peak power output. And GA03 has made a breakthrough in size by significantly reducing the width from 18.2mm to 7.45mm, maintaining a single bar output power of about 200W and supporting laser peak output of up to 6000W.

GA03 optimizes the conduction structure to efficiently transfer heat from the chip to the cooling water channel, maintaining the same output power while extending the product's lifespan. Both products have achieved a sustained lifespan test of 10 ^ 9 pulses, providing users with a more reliable user experience.

These two products have excellent flexibility and can freely customize the number of bars and output power according to customer needs, suitable for various application fields. GA03 has been successfully applied in the high-power semiconductor laser side pump module SP series of solid-state lasers (DPSSL), demonstrating a peak pump power output of up to 5000W and excellent performance indicators, thus winning the 2023 Innovation Award.

The emergence of these two lasers will inject new vitality into the technology field, helping users achieve product designs with smaller sizes and higher power output, while reducing costs and bringing more efficient solutions to the photon application field. At this moment, Juguang Technology once again proves its leading position and determination to continuously innovate in the field of laser technology.

Source: Laser Net

Đề xuất liên quan
  • Van's updates the manufacturer of laser-cut parts

    Van's Aircraft has responded to reports of ruptured dented parts found in AirVenture's latest kit. These defects are caused by external suppliers changing the process of laser cutting parts. From February 2022 to June 2023, Van's moved some parts from traditional punch manufacturing to an outside supplier that can laser cut rivet holes. The move is designed to increase the company's throughput and...

    2023-08-04
    Xem bản dịch
  • Breaking the limits of optical imaging by processing trillions of frames per second

    Pursuing higher speed is not just exclusive to athletes. Researchers can also achieve such feats through their findings. The research results of Professor Liang Jinyang and his team from the National Institute of Science (INRS) have recently been published in the journal Nature Communications.The team located at the INRS É nergie Mat é riaux T é l é communications resea...

    2024-04-08
    Xem bản dịch
  • GZTECH selected as a reserve "golden seed" enterprise for listing in Hubei Province

    Recently, relevant departments officially released the list of reserve "golden seed" enterprises for listing in Hubei Province for 2024-2025. Following being selected as reserve "golden seed" enterprises for listing in Donghu High tech Zone and Wuhan City in 2024, Wuhan GZTECH Co., Ltd. (hereinafter referred to as "GZTECH") once again stood out from many candidate enterprises with its outstanding ...

    05-19
    Xem bản dịch
  • The fourth CEO of this laser giant takes over strongly

    According to the latest news, on June 3, 2024, Coherent Corp. appointed Jim Anderson as CEO and he will also become a member of the board, replacing Vincent "Chuck" Mattera.Image source: CoherentAnderson (left) Mattera (right)Dr. Vincent "Chuck" D. Mattera, Jr. previously notified the Coherent Board of Directors on February 20, 2024, stating that he would resign from the position of CEO upon his ...

    2024-06-07
    Xem bản dịch
  • Shanghai Institute of Optics and Fine Mechanics has achieved beam splitting vortex control and interference detection for the first time in the 46.9nm wavelength band

    Recently, Associate Researcher Zhang Junyong from the High Power Laser Physics Joint Laboratory of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, together with Professor Zhao Yongpeng's research group from Harbin Institute of Technology and Professor Zhan Qiwen's research group from Shanghai University of Technology, completed the experimental verification of 46....

    2024-10-17
    Xem bản dịch