Error5 autoguido no esta habilitado en la configuracion de Grbl
Danh mục:
Tia laze
799
1
0
2023-10-28
C
Tory
2023-10-31Error 5 says basically GRBL parameter $20 is set to 0, meaning Homing is not enabled. In the Console window, enter $20=1 and see if that solves your problem. To see all your GRBL parameters, and to confirm your change, enter $$ in the Console window.
0Trả lời
Đề xuất liên quan
- 2024-01-29
- 2023-05-10
- 2022-10-26
-
Cut lines getting wider when cutting
1 Trả lời2024-01-04
