chanelink logo
CHANELINK
Türkçe

HGTECH Laser's New Product Debuts at the 2025 Munich Shanghai Light Expo

202
2025-03-07 16:26:05
Çeviriyi gör

New Product for Wafer Testing Probe Card Manufacturing Equipment Project

 


This project adopts vision guided laser precision cutting to separate the probe from the crystal disk, and then generate a product mapping image for use in the next process. When picking up the probe, multi-point reference surface fitting technology is used to achieve non-contact probe suction and avoid force deformation. After picking up the probe, posture correction technology is used to ensure that the probe is implanted into the fixture. Probe crystal disk size 8 ", thickness>20 μ m, cutting accuracy<10 μ m, heat affected zone<30 μ m, correction accuracy<2 μ m, implantation accuracy<10 μ m, welding accuracy XY<3 μ m, Z<8μm， Weld the maximum plate of 12 inches.

application area 
Electronic/Electrical/Semiconductor


New intelligent equipment for comprehensive printing and marking


The comprehensive printing and marking intelligent equipment is particularly suitable for the field of shipbuilding. Based on the assembly line method, it uses UV coding technology, combined with full format automatic 2D visual edge finding technology, under the control of MES system, and combined with dedicated control and programming conversion software, to achieve efficient printing of various display elements on steel plates in shipbuilding. The maximum printing width of the equipment is 5.5m, which can meet the printing needs of all steel plates in the shipbuilding process; The printing speed is fast, with a speed of up to 25m/min when used as an offline device. A steel plate with a size of 5.5 * 22m can complete all printing work in 53 seconds, which is more than 90% slower than traditional methods.

application area 
Tool manufacturing/engineering machinery

İlgili öneriler

  • Researchers use laser doping to enhance the oxidation of IBC solar cells

    Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar ce...

    2024-02-20
    Çeviriyi gör

  • Shanghai Optics and Machinery Institute has made new progress in evaluating the anti laser damage performance of thin film optical components using different laser damage testing protocols

    Recently, the research team of the High Power Laser Element Technology and Engineering Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made new progress in evaluating the laser damage resistance and damage mechanism of 532nm thin film polarizers using different laser damage test protocols. The related achievements were published in Optical Materi...

    2024-04-25
    Çeviriyi gör

  • Application of Laser Welding Technology in Ceramic Substrate Industry

     Ultra short laser pulses for local welding (Source: Fraunhofer IOF）With the accelerated evolution of electronic devices towards high power, high frequency, and miniaturization, ceramic substrates have become core materials in fields such as power semiconductors, 5G communications, and new energy vehicles due to their excellent thermal conductivity, insulation, and high temperature resistance. H...

    03-17
    Çeviriyi gör

  • University of Science and Technology of China realizes quantum elliptical polarization imaging

    Recently, the team led by Academician Guo Guangcan from the University of Science and Technology of China has made significant progress in the research of quantum elliptical polarization imaging. The research group of Professor Shi Baosen and Associate Professor Zhou Zhiyuan combined high-quality polarization entangled light sources with classical polarization imaging technology to observe the bir...

    04-14
    Çeviriyi gör

  • The Asia Photonics Expo will be held in Singapore from February 26th to 28th, 2025

    The Asia Photonics Expo (APE), as an internationally leading comprehensive brand promotion and business negotiation platform for optoelectronics, will be grandly held from February 26 to 28, 2025 at the L1 exhibition hall of the Sands Expo&Convention Centre in Singapore. As the top event in the field of optoelectronics, APE Asia Optoelectronics Expo will focus on cutting-edge innovative techno...

    01-03
    Çeviriyi gör