Türkçe

Significant progress has been made in the research on the detection of microwave electric fields in the Rydberg area of Shanghai Institute of Optics and Technology

693
2024-05-08 15:36:49
Çeviriyi gör

Recently, the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, and the East China Research Team of the Key Laboratory of Quantum Optics, Chinese Academy of Sciences, together with the research team of Professor Chen Liqing of East China Normal University, demonstrated a Rydberg microwave sensor with high sensitivity and high instantaneous bandwidth for the first time in rubidium Rydberg atoms. The related achievements are titled "Highly sensitive microwave electronics with enhanced instantaneous bandwidth" and published in the PHYSICAL VIEW APPLED (Letter).

Rydberg atoms are highly excited atoms with a large electric dipole moment and are highly sensitive to external electromagnetic fields. Therefore, it has been proposed to use the electromagnetic induced transparency (EIT) and Autler Townes (AT) effects of Rydberg atoms to measure microwave electric fields. The detection sensitivity and instantaneous bandwidth are key indicators for Rydberg microwave detection. Previously, based on Rydberg atomic superheterodyne detection technology, high sensitivity (55 nV cm? 1 Hz? 1/2) could be achieved, but its instantaneous bandwidth was limited to several hundred kilohertz. Having both high sensitivity and large instantaneous bandwidth is a challenge in the research field of Rydberg microwave electric field detection.

Based on six wave mixing technology, the research team experimentally demonstrated a Rydberg microwave sensor that achieves both high sensitivity and high instantaneous bandwidth in a rubidium Rydberg atomic gas chamber. With an instantaneous bandwidth of up to 10.2 MHz, the maximum detection sensitivity can reach 62nVcm-1Hz-1/2. Theoretical and experimental results indicate that the enhanced high-frequency response comes from the enhancement effect of the detection light negative sideband generated by the six wave mixing process. The research results will promote the application of Rydberg microwave sensing technology in radar and communication.

The related work has been supported by projects such as the National Natural Science Foundation of China.

Figure 1 Schematic diagram of the experimental setup for the principle (a) of the Rydberg microwave sensor

(b) (c) Two six wave mixing processes that generate positive and negative sidebands

Figure 2 Sensitivity of Rydberg Microwave Sensor (a) Relationship between Superheterodyne Signal and Signal Microwave Power (b) Sensitivity Determined by System Noise

Source: Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences

İlgili öneriler
  • Monport Laser's grand anniversary event ignited a boom in laser engraving industry

    Monport Laser, a leading manufacturer of laser engraving machines, is pleased to announce an exciting anniversary on its website. The event will mark the anniversary of Monport Laser and offer customers a range of exclusive offers and promotions. The event will highlight Monport Laser's commitment to innovation, customer satisfaction and the magic of laser engraving.The Monport Laser Anniversary...

    2023-08-04
    Çeviriyi gör
  • Laser Photonics Corporation receives MF-1020 order

    Recently, Laser Photonics Corporation (LPC) announced that it has partnered with Foon Technologies to receive its second order for the DefenseTech MRL (MF-1020) handheld cleaning system, which was facilitated by a distributor.The DTMF-1020 air-cooled handheld pulse laser cleaning equipment adopts dual axis technology, simplifying the maintenance process. The system will be used by the Navy Command...

    02-27
    Çeviriyi gör
  • Process practice of blue light semiconductor laser cladding copper on copper

    Laser Cladding, also known as laser cladding or laser cladding, is a method of adding cladding material to the surface of the substrate and using a high-energy density laser beam to melt it together with the thin layer on the surface of the substrate. It forms a metallurgical bonded additive cladding layer on the surface of the substrate, which can be used for surface strengthening and defect repa...

    2024-04-09
    Çeviriyi gör
  • Cambridge University researchers use lasers to "heat and strike" 3D printed steel

    According to the University of Cambridge, researchers have developed a new method for 3D printing metal, which can help reduce costs and more effectively utilize resources. This method, developed by a research team led by the University of Cambridge, allows structural modifications to be "programmed" into metal alloys during 3D printing - fine-tuning their performance without the need for thousand...

    2023-11-03
    Çeviriyi gör
  • Medium-long wavelength infrared quantum cascade laser of MOCVD on silicon

    Us researchers report 8.1 μm wavelength quantum cascade laser (QCL) grown on silicon (Si) by MOCVD [S. Xu et al., Applications. Physics Letters, v123, p031110, 2023]. "There are no previous reports of QCL growth on silicon substrates by metal-organic chemical vapor deposition (MOCVD)," commented the team from the University of Wisconsin-Madison, the University of Illinois at Urbana-Champaign an...

    2023-08-04
    Çeviriyi gör