Türkçe

Scientists achieve extremely short laser pulses with a peak power of 6 terawatts

370
2024-04-22 15:45:43
Çeviriyi gör

RIKEN's two physicists have achieved extremely short laser pulses with a peak power of 6 terawatts (6 trillion watts) - roughly equivalent to the power generated by 6000 nuclear power plants. This achievement will contribute to the further development of attosecond lasers, for which three researchers were awarded the Nobel Prize in Physics in 2023. This study was published in the journal Nature Photonics.

Just like camera flashes can "freeze" rapidly moving objects, making them appear stationary in photos, extremely short laser pulses can help illuminate ultrafast processes, providing scientists with a powerful method for imaging and detecting them.

For example, laser pulses of the order of attoseconds (1 attosecond=10-18 seconds) are so short that they can reveal the motion of electrons in atoms and molecules, providing a new method for discovering the evolution of chemical and biochemical reactions. Even light seems to be able to crawl on such a short time scale, passing through one nanometer takes about 3 attoseconds.

"By capturing the motion of electrons, attosecond lasers have made significant contributions to basic science," said Eiji Takahashi of RIKEN Advanced Photonics Center (RAP). "They have the potential to be applied in a wide range of fields, including observing biological cells, developing new materials, and diagnosing medical conditions."

More impactful
However, although it is possible to produce ultra short laser pulses, they lack impact force and have low energy. Creating ultra short and high-energy laser pulses will greatly expand their potential applications. Eiji Takahashi said, "The current output energy of attosecond lasers is extremely low. Therefore, increasing their output energy is crucial if they are to be used as light sources in a wide range of fields."

Just like audio amplifiers are used to enhance sound signals, laser physicists use optical amplifiers to increase the energy of laser pulses. These amplifiers typically use nonlinear crystals with special responses to light. However, if these crystals are used to amplify single cycle laser pulses, they will suffer irreparable damage. The single cycle laser pulse is very short, to the point where it ends before the light oscillates for a complete wavelength cycle.

Eiji Takahashi stated, "The biggest bottleneck in developing high-energy, ultrafast infrared laser sources is the lack of an effective method to directly amplify single cycle laser pulses. This bottleneck results in a 1 millijoule barrier of single cycle laser pulse energy."

Set a new record
However, this bottleneck has now been overcome. They have amplified the single cycle pulse to over 50 millijoules, which is more than 50 times the best result before. Due to the extremely short laser pulses generated, these energies are converted into incredible high power of several terawatts.
Takahashi said, "We have demonstrated how to overcome bottlenecks by establishing an effective method to amplify single cycle laser pulses."

Their method, called Advanced Double Chirp Optical Parametric Amplification (DC-OPA), is very simple and only involves two crystals, amplifying the complementary regions of the spectrum.

Takahashi said, "The advanced DC-OPA for amplifying single cycle laser pulses is very simple, it's just a combination of two nonlinear crystals - it feels like an idea that anyone can think of. Such a simple concept provides a new amplification technology and has made breakthroughs in the development of high-energy ultrafast lasers, which surprised me."

Importantly, advanced DC-OPA operates over a very wide wavelength range. The research team is able to amplify pulses with wavelengths that differ by more than twice. Takahashi said, "This new method has a revolutionary feature, which is that amplifying bandwidth can achieve ultra wide frequency output without affecting the output energy scaling characteristics."

New amplification technology
Their technology is a variant of another optical pulse amplification technique called "chirped pulse amplification", for which three researchers from the United States, France, and Canada won the Nobel Prize in Physics in 2018. There is an interesting connection between the awards in 2018 and 2023: Chirped pulse amplification is one of the technologies driving the development of attosecond lasers.

Takahashi predicts that their technology will further drive the development of attosecond lasers: "We have successfully developed a new laser amplification method that can increase the intensity of a single cycle laser pulse to a peak power of terawatts," he said. "Undoubtedly, this is a significant leap in the development of high-power attosecond lasers."

In the long run, his goal is to surpass attosecond lasers and create shorter pulses.

Source: OFweek Laser Network

İlgili öneriler
  • Shanghai Institute of Optics and Fine Mechanics has achieved beam splitting vortex control and interference detection for the first time in the 46.9nm wavelength band

    Recently, Associate Researcher Zhang Junyong from the High Power Laser Physics Joint Laboratory of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, together with Professor Zhao Yongpeng's research group from Harbin Institute of Technology and Professor Zhan Qiwen's research group from Shanghai University of Technology, completed the experimental verification of 46....

    2024-10-17
    Çeviriyi gör
  • The UK team collaborated to evaluate epitaxial materials for surface-coupled lasers

    Sivers Photonics, a leading UK-based supplier of optical fiber communications and III-V semiconductor Photonics devices, has announced that it has received an initial order from UK-based laser developer Vector Photonics to evaluate epitaxial materials for a new next-generation surface-coupled laser project.The order, which includes laser manufacturing and life testing, will be the first time the t...

    2023-09-11
    Çeviriyi gör
  • Bohong has developed a new type of ultrafast laser for material processing

    Chief researcher Clara Saraceno will bring the new laser to the market with the support of ERC funding.Femtosecond lasers can be used to create high-precision microstructures, such as those required for smartphone displays and various automotive technology applications.Professor Clara Saraceno from Ruhr University in Bochum, Germany is committed to developing and introducing cheaper and more effic...

    2023-08-22
    Çeviriyi gör
  • Feasibility Study on Composite Manufacturing of Laser Powder Bed Melting and Cold Casting

    It is reported that researchers from the Technical University of Munich in Germany have reported a feasibility study on the composite manufacturing of EN AC-42000 alloy by combining laser powder bed melting and cold casting. The related research titled "Feasibility study on hybrid manufacturing combining laser based powder bed fusion and chill casting on the example of EN AC-42000 alloy" was publi...

    2024-06-06
    Çeviriyi gör
  • Laser giant announces launch of new fiber laser platform

    Recently, Coherent Corp. announced the launch of the EDGE FL TM high-power fiber laser series, tailored specifically for cutting applications in the machine tool industry. The power levels of the EDGE FL series range from 1.5kW to 20kW, redefining the balance between value and performance to meet the growing demand for high-power, reliable laser sources in fiber laser cutting.With the increasing d...

    2024-10-23
    Çeviriyi gör