Türkçe

3D printed nanocellulose for green building applications

470
2024-02-19 15:49:03
Çeviriyi gör

The hydrogel material made of nano cellulose and algae was tested as an alternative and more environmentally friendly building material for the first time. This study from Chalmers Institute of Technology and the Wallenburg Wood Science Center in Sweden demonstrates how to 3D print rich sustainable materials into various building components, using much less energy than traditional building methods.

The study has been published in the journal Materials and Design.
Nowadays, the construction industry consumes 50% of global fossil resources, generates 40% of global waste, and contributes to 39% of global carbon dioxide emissions. There is increasing research on biomaterials and their applications in order to transition to a greener future based on European green agreements and other initiatives.

Nanocellulose is not a new biomaterial. Its characteristics as a hydrogel are well known in the biomedical field. Due to its biocompatibility and wetness, it can be 3D printed into scaffolds for tissue and cell growth. But it has never been dry and used as a building material before.

"We have explored the structural application of nano cellulose hydrogel for the first time. Specifically, we have provided the missing knowledge about its design related functions so far, and with the help of our samples and prototypes, we have demonstrated the adjustability of these functions through customized digital design and robot 3D printing," said Malgorzata Zboinska, the main author of the study at Chalmers University of Technology.

The team used nanocellulose fibers and water, and added an algal material called alginate. Alginate enables researchers to produce 3D printable materials because it adds extra flexibility to the material during drying.

Cellulose is hailed as the most abundant environmentally friendly alternative to plastics, as it is one of the largest industrial by-products in the world. "The nanocellulose used in this study can be obtained from forestry, agriculture, paper mills, and agricultural straw residues. In this sense, it is a very rich material," said Malgorzata Zboinska.

Nowadays, the construction industry is surrounded by digital technology, which allows for the use of a wider range of new technologies, but there is a gap in how to apply these technologies. According to the European Green Agreement, by 2030, buildings in Europe must improve resource efficiency, which can be achieved by improving the reuse and recycling of materials, such as nanocellulose, which is a byproduct of industrial upgrading and reconstruction. As architecture becomes more circular, cutting-edge digital technology is emphasized as an important lever to achieve these goals.

"3D printing is a very resource-saving technology. It allows us to manufacture products without molds, casting molds, and other things, thus reducing waste. It is also very energy-efficient. The robot 3D printing system we use does not use heat, only air pressure. This saves a lot of energy because we only work at room temperature," said Malgorzata Zboinska.

Energy saving process depends on the shear thinning characteristics of nano cellulose hydrogel. When you apply pressure, it liquefies, allowing it to be 3D printed, but when you eliminate pressure, it maintains its shape. This allows researchers to work without the energy intensive processes commonly found in the construction industry.

Malgorzata Zboinska and her team have designed many different tool paths for the robot 3D printing process to observe the performance of nano cellulose hydrogels when drying in different shapes and patterns. Then, these dry shapes can be used as the basis for designing various independent building components, such as lightweight room partitions, louvers, and wall panel systems. They can also form the foundation for existing building component coatings, such as ceramic tiles for composite walls, acoustic components for damping sound, and composite skeleton walls when combined with other materials.

Traditional building materials are designed to last for hundreds of years. Typically, they have predictable behavior and homogeneous properties. We have concrete, glass, and various durable hard materials that we know will age over time. In contrast, bio based materials contain organic matter, which is designed from the beginning for biodegradation and recycling back into nature. Therefore, we need to acquire new knowledge on how to apply them in architecture, as well as how to accept their shorter lifecycle cycles and heterogeneous behavior patterns, more similar to those found in nature, rather than in artificial and completely controlled environments. "Design researchers and architects are currently actively seeking ways to design products made from these materials, both in terms of functionality and aesthetics," said Malgorzata Zboinska.

This study provides a first step in demonstrating the amplification potential of dry environments and 3D printed nanocellulose membrane structures, as well as a new understanding of the relationship between material deposition pathways and size, texture, and geometric effects in the final structure through 3D printing design. These knowledge are necessary stepping stones that will enable Malgorzata Zboinska and her team to further research and develop the application of nanocellulose in building products that need to meet specific functional and aesthetic user requirements.
The characteristics of new bio based materials are not yet fully understood, which has prompted architectural researchers to establish alternative methods to design these new products, not only in terms of functional quality, but also in terms of user acceptance. The aesthetics of bio based materials are an important component. If we want to propose these bio based materials to society and humanity, we also need to cooperate with design. This becomes a very powerful factor in accepting these materials. If people do not accept them, we will not be able to achieve the goals of circular economy and sustainable building environment.

Source: Laser Net

İlgili öneriler
  • Xi'an Institute of Optics and Fine Mechanics: New progress in large field two-photon scattering microscopy imaging technology

    Adaptive optics is a technique that improves imaging quality by correcting wavefront distortion. Interference focus sensing (IFS), as a new method proposed in the field of adaptive optics in recent years, has been proven to have significant effects in correcting complex aberrations in deep tissue imaging. This technology is based on measuring a single location within the sample to determine the ca...

    04-15
    Çeviriyi gör
  • Lumiotive Launches New LiDAR Sensor LM10

    Recently, optical semiconductor developer Lumiotive, headquartered in Seattle, USA, launched a new LiDAR sensor LM10, which is its first fully produced product of light controlled metasurface (LCM) technology designed for digital beam steering.The developers stated that compared to mechanical systems, their digital beam steering method overcomes the limitations of traditional LiDAR sensors in term...

    2023-09-02
    Çeviriyi gör
  • Tiedra Famaceutica uses Macsa ID's SPA2 CB laser marking system

    Tiedra Famaceutica was founded by members of the Tiedra family in 2003 and is a manufacturer of contact lenses, health and ophthalmic products, as well as diagnostic instruments used in optometry and ophthalmic clinics.Before installing the SPA2 CB laser model for Macsa id, Tiedra used a pantograph, which is a quadrilateral system composed of hinged rods. This manual process provides limited marki...

    2023-12-14
    Çeviriyi gör
  • Germany has developed direct laser welding technology to achieve adhesive free connection from fiber to chip

    Recently, researchers and their partners from the Fraunhofer Institute for Reliability and Microstructure (IZM) in Germany announced the successful development of a laser welding technology that can efficiently fix optical fibers onto photonic integrated circuits (PICs) without the need for adhesive bonding.This technology is developed in response to biophoton sensing technology, mainly utilizing ...

    2023-08-22
    Çeviriyi gör
  • Laser cladding method improves the surface performance of parts

    Laser cladding, also known as laser metal deposition, is a process of depositing one material onto another.When the laser beam scans the target surface, metal powder or wire flow is fed into the molten pool formed by the laser beam, thereby producing the required material coating.The laser cladding method improves the surface properties of the parts, such as wear resistance, and allows for the rep...

    2023-12-28
    Çeviriyi gör