chanelink logo
CHANELINK
Türkçe

Shanghai Photonics Corporation has made progress in laser welding of structural materials (Ni-28W-6Cr alloy) for new-generation molten salt reactors

196
2023-08-25 13:59:25
Çeviriyi gör

Recently, Yang Shanglu, a researcher at the Laser Intelligent Manufacturing Technology Research and Development Center of Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made new progress in laser welding of the fourth-generation reactor-molten salt reactor structural material Ni-28W-6Cr nickel-based superalloy. 

The research team applied the high power fiber laser welding technology to Ni-28W-6Cr alloy for the first time, and analyzed the dynamic cracking behavior characteristics of the laser welding hot crack by using high speed camera technology, and clarified the cracking mechanism. 

The relevant research results are summarized as "Dynamic laser welding hot cracking behavior and mechanism of new structural material Ni-28W-6Cr alloy for molten. salt reactor "was published in the Journal of Materials Research and Technology.

Ni-28W-6Cr high temperature nickel base alloy is a new structural material designed for the new generation of high temperature molten salt reactor (> 850℃) in China, which has excellent high temperature resistance and corrosion resistance to molten salt. However, due to the high alloying level of the alloy, it has a very high sensitivity to welding hot cracks, which poses a great threat to the service safety of welded joints and structures. 

In order to improve the laser welding quality of Ni-28W-6Cr alloy and promote the application of nuclear energy engineering, it is urgent to study the cracking behavior and influencing factors of Ni-28W-6Cr high temperature nickel base alloy laser welding, and solve the problem of laser cracking by elucidating the cracking mechanism.

The dynamic crack behavior of Ni-28W-6Cr alloy laser welding was analyzed by using a 10,000-watt laser processing unit combined with high-speed imaging technology, and the relationship between the type, number, size, propagation behavior and laser power of the hot crack was obtained. 

The influencing factors of hot crack initiation and propagation (laser process parameters, element segregation, precipitated phase and stress, etc.) were clarified, and the mechanism of hot crack cracking in laser welding was elucidated. The work laid a foundation for the control of Ni-28W-6Cr alloy laser welding hot crack, the realization of alloy defect free laser welding, and promote the construction of a new generation of molten salt reactor.

This work is supported by the National Natural Science Foundation Youth Fund and the National Key Research and Development Program.

Figure 1: (a) Dynamic cracking behavior of Ni-28W-6Cr alloy during laser welding; (b) microstructure of Ni-28W-6Cr alloy during laser welding.

Figure 2 EBSD analysis results of Ni-28W-6Cr alloy laser welding hot crack: (a) solidification crack, (b) liquefaction crack.

Source: Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences

İlgili öneriler

  • Photonic time crystals triggered by laser pulses may open the door to a new branch of optics

    When scientists discovered that laser pulses can rapidly cause refractive index changes in the medium, resulting in "photonic time crystals (PTC)" in the near-visible light band, the door to a disruptive new application in optics seemed to quietly open.Scientists have a certain degree of understanding of photonic crystals and time crystals, the two have almost nothing in common, the basic common p...

    2023-09-07
    Çeviriyi gör

  • Researchers develop new techniques for controlling individual qubits using lasers

    Researchers at the University of Waterloo's Institute for Quantum Computing (IQC) have developed a new technique that uses lasers to control individual qubits made from the chemical element barium. The breakthrough is a key step toward realizing the capabilities of quantum computers.The new technique uses thin glass waveguides to segment and focus laser beams with unprecedented precision. Each foc...

    2023-09-12
    Çeviriyi gör

  • Scientists have successfully miniaturized erbium-based erbium lasers on silicon nitride photonic chips

    Scientists from the Federal Institute of Technology in Lausanne (EPFL) have successfully miniaturized a powerful erbium-based erbium laser on silicon nitride photonic chips. Due to the large volume and difficulty in shrinking of typical erbium-based fiber lasers, this breakthrough is expected to make significant progress in optical communication and sensing technology.Since the 1960s, lasers have ...

    2024-06-13
    Çeviriyi gör

  • The wide application of laser plastic welding technology in the field of automobile manufacturing

    With the rapid development of society, people's demands for energy conservation, emission reduction, and safety in automobiles are increasing. Automobile manufacturers are seeking lightweight manufacturing processes for automobiles, changing traditional component packaging processes, and so on. Laser plastic welding technology has emerged, and below is a brief sharing of the application of plastic...

    2024-09-26
    Çeviriyi gör

  • A new method for generating controllable optical pulse pairs using a single fiber laser

    Researchers from Bayreuth University and Konstanz University are developing new methods to control ultra short laser emission using soliton physics and two pulse combs in a single laser. This method has the potential to greatly accelerate and simplify laser applications.Traditionally, the pulse interval of lasers is set by dividing each pulse into two pulses and delaying them at different, mechani...

    2024-01-15
    Çeviriyi gör