chanelink logo
CHANELINK
Türkçe

Snapmaker introduces new 20W and 40W laser modules

639
2023-08-04 16:51:00
Çeviriyi gör

Snapmaker has opened pre-orders for 20W and 40W laser modules, which are significant upgrades to the modules available on existing Snapmaker machines.

Snapmaker says that with the 40W module installed, you will be able to cut 15 mm basswood plywood at a time at a speed of 20 mm/SEC. With 20W, you will cut 10mm at a rate of 10mm/SEC. That's a lot more than Artisan and Snapmaker 2.0 - both are compatible with the new modules and have 1.6W and 10W modules, respectively. The only thing to note is that it doesn't have a camera like those found on 10W devices.

 

Power and speed are not the only focus here. Both modules have "smart" air assist features that help keep the laser lens clean and blow away smoke to prevent burning. Users can control this feature through Snapmaker's free and open source CAM software Luban. This will allow them to apply air assistance only to the cutting layer of the part being cut and sculpted, as well as access a range of laser material profiles.

 

In addition, the "focus stick" makes laser calibration easier, and the user can release this lever and manually move the tool head down until the lever touches the material. Snapmaker also has an autofocus setting on the machine that runs according to material thickness. Even better is the laser safety shield as well as orientation detection, which uses a gyroscope sensor to ensure the module is properly installed and kept in place.

 

Given that the new laser is compatible with Snapmaker's older machine, Snapmer 2.0, the manufacturer's dedication to modularity and ongoing support is notable. Snapmaker 2.0 is now more than four years old, which is a commendable support time from a consumer perspective. In addition to 2.0 and Snapmaker Artisan, these modules are also compatible with the Snapmaker Ray series, Ray laser engravers and cutters, and a variety of other modules for OEM machines.

 

Snapmaker's laser module is available for pre-order on the Snapmaker website, with discounted prices currently down to $499 for the 20W version and $899 for the 40W version. Anyone who buys Snapmaker 2.0 or Artisan before July 24 will get an extra 10% off. Depending on the item you ordered, the expected delivery time is between late October and late December.

 

Source: Laser Network

İlgili öneriler

  • New type of femtosecond laser: used for broadband terahertz generation and nonlinear wafer detection

    Recently, HüBNER Photonics, the leading manufacturer of high-performance lasers, has launched the latest member of the VALO femtosecond series - VALO Tidal. This laser not only represents a major leap in the fields of imaging, detection, and analysis, but also demonstrates the infinite possibilities of laser technology with its outstanding performance.The VALO Tidal femtosecond laser typically sho...

    2024-06-26
    Çeviriyi gör

  • Danish scientists have created solar cells based on selenium using a new laser annealing technique

    A team of scientists at the Technical University of Denmark has created a selene-based solar cell by replacing thermal annealing with a new laser annealing strategy."In our work, we investigated the potential of this laser annealing strategy specifically for selenium thin film solar cells, and we report a new world record for fill factor, a new world record for ideal factor, and the most advanced ...

    2023-09-06
    Çeviriyi gör

  • OPO laser testing optical components

    Optical parametric oscillator laser tests fibers and components to characterize the spectral response of optical components, thereby providing a competitive advantage in the optical industry.OPO lasers have long been used in complex testing and measurement applications, such as mass spectrometry, photoacoustic imaging, and spectroscopy. Now, these "tunable" pulse lasers are being used to facilitat...

    2024-02-20
    Çeviriyi gör

  • Emerging laser technologies for precise manufacturing of multifunctional nanomaterials and nanostructures

    The use of photons to directly or indirectly drive chemical reactions has fundamentally changed the field of nanomaterial synthesis, leading to the emergence of new sustainable laser chemistry methods for manufacturing micro - and nanostructures. The incident laser radiation triggers complex interactions between chemical and physical processes at the interface between solid surfaces and liquid or ...

    2024-08-05
    Çeviriyi gör

  • The tesat optical terminal selected by Lockheed Martin satellite has passed ground testing

    Tesat Spacecom's laser communication terminal announced on October 26th that the company has passed critical ground testing deployed on NASA satellites.Tesat's SCOTT80 optical terminal was selected by Lockheed Martin, one of several manufacturers producing satellites for the Space Development Agency.SDA is an agency under the United States Space Force that plans to deploy a network of interconnect...

    2023-10-27
    Çeviriyi gör