chanelink logo
CHANELINK
Türkçe

The new Casiris H6 4K UST tricolor laser projector is about to be launched through Indiegogo

464
2023-09-18 14:19:42
Çeviriyi gör

Casir is about to launch the H6 4K UST tricolor laser projector through Indiegogo. The new laser projector has a brightness of up to 3000 ANSI lumens and a BT.2020 color gamut coverage of 110%. It is an ultra short focus projector that runs on Android TV.

The Casiris H6 4K UST tricolor laser projector is a brighter and more accurate version of the Casiris A6. It also has greater image projection capabilities than its predecessor, the Casiris A6. It can project images up to 150 inches wide with a projection ratio of 0.25:1. The projector is equipped with an RGB triple laser light source and is expected to have a lifespan of 30000 hours. The H6 4K projector covers 207% of the Rec 709 color space.

The new Casiris laser projector supports HDR10 output and features automatic focusing and 8-point trapezoidal correction tools. It also features MEMC motion smoothing and 35 millisecond low latency mode. This projector is compatible with 3D, but requires a pair of active shutter 3D glasses. Two built-in 15W speakers provide sound output for the projector. The speaker supports Dolby Atmos and DTS-HD, as well as wireless projection. The memory configuration of the Casiris H6 4K UST tricolor laser projector is 4GB/64GB.

The Indiegogo event for the Casiris H6 projector will be launched this autumn, but the specific date has not been announced yet. Casiris has not provided any pricing information for the projector. As the release approaches, availability and pricing details, as well as Indiegogo goals, will be released.

Source: Laser Network

İlgili öneriler

  • Processing application of ultrafast laser on bulk metallic glass

    Recently, an international research team led by Professor Zhang Peilei from the School of Materials Science and Engineering at Shanghai University of Engineering and Technology published a review paper titled "Research status of femtosecond lasers and nanosecond lasers processing on bulk metallic glasses (BMGs)" in the renowned journal Optics&Laser Technology in the field of optics and lasers....

    2023-09-18
    Çeviriyi gör

  • Natural Communication: Oxide Dispersion Enhancement for High Performance 3D Printing of Pure Copper

    The laser additive manufacturing technology of pure copper (Cu) with complex geometric shapes has opened up vast opportunities for the development of microelectronic and telecommunications functional devices. However, laser forming of high-density pure copper remains a challenge.Recently, the forefront of additive manufacturing technology has noticed a joint report by the University of Hong Kong, ...

    04-11
    Çeviriyi gör

  • Harvard University and University of Vienna invented tunable laser chips

    Researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and Vienna University of Technology (TU Wien) have invented a new type of tunable semiconductor laser that shows smooth, reliable, wide-range wavelength tuning in a simple, chip-sized design.Tunable lasers are integral to many technologies, from high-speed telecommunications to medical diagnostics to safet...

    07-16
    Çeviriyi gör

  • Latest breakthrough! 3500W free output blue semiconductor laser

    The 3500W free output blue semiconductor laser beam is output in a free space manner, with a rectangular spot directly acting on the material surface without the need for fiber optics or laser processing heads. This laser has a wavelength of 455 ± 10nm, with continuously adjustable power and a maximum output power of over 3500W. It is mainly used for non-ferrous metal cladding, quenching, etc., to...

    2024-09-03
    Çeviriyi gör

  • Four ways researchers harness the power of lasers to achieve manufacturing excellence

    The use of industrial lasers has become a viable option for many manufacturing processes. It enables workers to simplify steps, improve precision and benefit from the benefits associated with output. Decision makers will get the best results when they consider the specific possibilities of using lasers in manufacturing. Here are some options.Improved cleaning and texturing methodsMany man...

    2023-08-04
    Çeviriyi gör