Shimano MTB Brake Bleed Kit (M5x0.8 Fitting)

A cup and plug designed for bleeding Shimano mountain bike hydraulic brakes with an M5x0.8 threaded fitting. The cup's inner geometry accommodates a standard 3.5-degree luer slip syringe, allowing you to pull a vacuum. Printing requires careful slicer settings, particularly adaptive layer height, with a recommended layer height between 0.1mm and 0.3mm for a 0.4mm nozzle. Print time for the cup is about 20 minutes. Cleaning the thread with a die is recommended for best results. This part is not compatible with Shimano road bike fittings, which use an M7x0.75 thread.