Detaylar
This decoupler is designed for GSO RC telescopes to reduce drag on the mirror cell and prevent decollimation during position changes. It supports heavy load image trains. Installation involves disassembling the back plate, removing the primary mirror, resetting collimation screws, and using a centering cap to align the decoupler. Screw holes are drilled and threaded for M6x1 bolts. An optional laser-cut washer from 1mm EVA foam can be added. The prototype is solid but use at your own risk.
Bu tasarımı yaptınız mı? Bitirdiğiniz proje fotoğraflarını yorumlarda paylaşın.
Yorumlar (0)
Veri yok
Etiketler
Bunu da beğenebilirsiniz
- $1.87
Kawasaki KX85 KX100 KX80 Flywheel Stator Cover Spacer or Gasket
PhotonPhoenix0 - $1.35
MKS DLC32 Max Case
Aldric0 
Islamic Seamless Pattern SVG File
Tory0- $1.00
Harvest Right Freeze Dryer Tray Spacer
Elara0 
Alfawise U20 Direct Drive Mod
CutMasterPro0- $2.78
Cobi Mig 29 (5840) Improved Intake Inserts
AcrylicArtist0 
Honeycomb Bravo Throttle Quadrant Knob Replacements
MetalMarker0- $1.00
Anycubic Vyper Spool Holder Mount
Sophia0 
Atomstack A24 PRO Riser Stand 2.5 inch
Yara0
Air Assist for Creality Falcon 10W Laser Engraver
CutlineCreator0
Board mount for Anycubic Trigorilla
LaserCrafter0
K40 Focus Alignment Tool with Dual Red Dot Laser Diodes
FrostFireFab0- $1.00
TT Motor Mount for Robotics Platform
EngraveEagle0 
K40 Laser Height Measuring Guide with Magnet Mount
Sable0
120mm Fan Exhaust Adapter for Vent Hose
KerfKnight0
