Print in Place Articulated Action Figure Male 7 Inch

This articulated male figure stands about 7.1 inches tall at 100% scale and prints without supports. It features redesigned cylinder joints that stay on better than the female version, which uses sphere joints. For best results, use a 0.3 mm nozzle and pull the model down about -0.2 mm on the Z-axis in Cura to improve first layer adhesion. After printing, gently loosen the spin joints with pliers and wiggle them back and forth. The first layer may stick, so careful cutting with a razor can help. The legs have been shortened from the original, and the bending joints are tighter. This is a work in progress, ideal for creating custom action figures.