Xtool D1 pro with extensions not going home

For most GRBL and open source laser engraver controllers in general, the Machine Settings are available to be written to by the user.
xTool has a closed source model and some have found that changes to the settings do not survive a power (on-off-on) cycle.
If you’re inclined to test for yourself, you may have access to adjust the axis length setting for yourself.
The X-axis length setting is $130. The Y-axis length is $131.
From the Console window in LightBurn, with the engraver connected, please request the System Information and Machine Settings by typing the following:
$i
$$
pressing enter after each line.