chanelink logo
CHANELINK
Türkçe

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Kategoriler:
Ruida
Etiketler:
733
1
Çeviriyi gör
2022-12-30

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.
C

    • Marshall

      2023-01-03
      ① The polarity of the Y axis is reversed. Reset the polarity;
② The limit switch is broken and needs to be repaired.
        Çeviriyi gör
        Yanıtla
      İlgili öneriler
      Topla
      Rapor