photo engrave

44CFD702

Kategoriler:

Ruida

699

Çeviriyi gör

2024-10-12

even with a 1mb jpeg photo...i get "not enough buffer space.....can cut shapes, but cant do photo engrave....

6445S....i'm guessing this is a parameter.....i have 450mm x 380mm working space....even reducing photo to 100mm x100mm...immediately get this error on panel

blue sea

2024-10-14

Format the controller memory space to delete unused graphics files. You can delete and format it in the File menu on the Control Panel.

Çeviriyi gör

Yanıtla

İlgili öneriler

Takip Et

Beğen

Topla

Rapor

photo engrave

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

Controller Fault?

Using V8 software, in user parameters, cutting parameters and idle acceleration are invalid after they are changed,how to solve?

Ruida controller panels logo setting

When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.