chanelink logo
CHANELINK
Русский

The LiDAR SLAM navigation system uses laser sensors to realize real-time 3D mapping of the environment

471
2023-09-11 15:01:14
Посмотреть перевод

Robotic lawn mowers are becoming increasingly popular due to their convenience and ability to save time and effort. Although robotic lawnmowers have made significant progress over the years, many robots still require users to lay perimeter wires to define the mowing area and remove any obstructions from the lawn to ensure the mower doesn't get stuck or damaged.

Well, that's not the case with the Neomow X robotic lawn mower. Developed by Hong Kong-based company Hookii, the Neomow X is the first innovative robotic lawnmower equipped with an advanced LiDAR SLAM navigation system.

Neomow's advanced LiDAR SLAM navigation system uses laser sensors to enable real-time 3D mapping of the environment. LiDAR SLAM Precision Navigation takes on the task of navigating the lawn with unparalleled precision, ensuring that every square inch is carefully mowed. With this cutting-edge technology, Neomow X can easily cope with challenging lawn conditions and is not affected by light or signal interference.

The robot lawnmower integrates a 360° LiDAR module and an intelligent obstacle avoidance system, which can detect and avoid obstacles in all directions, and independently plan avoidance routes. It also has a wide-angle front bumper for additional protection.

It features a patented stylish design with embedded blades and a cut-out disc that prevents grass clippings from clogging the disc.

In addition, the new mower is also equipped with intelligent automatic charging function, when the battery is low, Neomow can automatically return to the charging station. After charging, it picks up where it left off last time. Charging stations can be installed indoors or outdoors according to your preference.

The Neomow X has a 234Wh lithium battery that provides up to 120 minutes of mowing time, and the Neomow X pro has a 315Wh battery that lasts up to 180 minutes.

The robot uses a front-wheel drive system that helps it move smoothly on any terrain. In addition, the mower has a 45-degree climb capability and an IPX5 waterproof rating to mow lawns in any weather. Neomow X operates at noise levels below 60dB during the day and at night without compromising the peaceful environment.

The mower can be customized with the Hookii app, allowing you to easily personalize mowing preferences, set schedules, and monitor progress from your smartphone. The app can also be used to choose between four different mowing modes, set the height of the floating cutting disc, adjust the mowing Angle for each task, or track the GPS coordinates of a device if it is stolen.

In addition, Neomow X offers multiple connectivity options, including 4G, Wi-Fi, and Bluetooth, for easy remote control, configuration, and location monitoring.

The Neomow X and Neomow X Pro are only available on Kickstarter and start at $1,199 and $1,499, respectively.

Source: Laser Network

Связанные рекомендации

  • China University of Science and Technology has made progress in the study of the regulatory mechanism of thermally induced delayed fluorescence

    Recently, Professor Zhou Meng's research group at the University of Science and Technology of China collaborated with Professor Fu Hongbing's team at the Capital Normal University to reveal the mechanism by which aggregation effects regulate the luminescent properties of thermally delayed fluorescent materials. The research findings, titled "Aggregation Enhanced Thermally Activated Delayed Fluoros...

    2024-06-28
    Посмотреть перевод

  • China University of Science and Technology proposes composite cold field 3D printing technology for liquid crystal elastomers

    Recently, Associate Professor Li Mujun from the School of Engineering Sciences and the Institute of Humanoid Robotics at the University of Science and Technology of China, together with researchers such as Professor Zhang Shiwu, has made significant progress in the field of intelligent material 3D printing. The research team proposed composite cold field 3D printing technology and successfully pre...

    02-25
    Посмотреть перевод

  • 43 seconds! Completion of laser welding of a new energy vehicle body

    March 8, in the three sessions of the 14th National People's Congress, the second “representative channel” focused on interviews, the National People's Congress, the party secretary of HGTECH Science and Technology, Chairman of the Board of Directors Ma Xinqiang, said in response to a reporter's question, in order to crack the “strangle  “technical problems, HGTECH over the years in the field of h...

    03-11
    Посмотреть перевод

  • Chip guided beam for new portable 3D printers

    Imagine being able to carry a 3D printer with you and quickly create low-cost objects, such as fastening bicycle wheels or parts needed for critical medical surgeries. Scientists from the Massachusetts Institute of Technology (MIT) and the University of Texas at Austin have combined silicon photonics and photochemical technology to successfully develop the first chip based 3D printer, taking a cru...

    2024-06-18
    Посмотреть перевод

  • Researchers use laser doping to enhance the oxidation of IBC solar cells

    Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar ce...

    2024-02-20
    Посмотреть перевод