Русский

Danish scientists have created solar cells based on selenium using a new laser annealing technique

937
2023-09-06 15:54:29
Посмотреть перевод

A team of scientists at the Technical University of Denmark has created a selene-based solar cell by replacing thermal annealing with a new laser annealing strategy.

"In our work, we investigated the potential of this laser annealing strategy specifically for selenium thin film solar cells, and we report a new world record for fill factor, a new world record for ideal factor, and the most advanced of the studies," Rasmus Nielsen, lead author of the study, told the Journal of Photovoltology. "In addition, the laser annealing strategy allows us to control the morphology of the light absorber to an incredible degree."

The proposed laser annealing strategy involves irradiating the selenium absorber through a translucent substrate, which the researchers say results in negligible surface roughness and larger grains. "The crystallization technique is particularly interesting because it enables the selenium absorber to crystallize without heating the substrate," Nielsen also explains.

The team built the battery with a sodium-calcium glass substrate, a tin oxide (FTO) layer, an electron transport layer made of titanium oxide (TiO2), a selenium absorber, a molybdenum oxide (MoOx) layer, and a gold (Au) layer.) Metal contact. TiO2 films are formed by sputtering metal Ti in a reaction atmosphere and at a substrate temperature raised to 400°C. The battery is then annealed for 1 hour at 500°C under a high vacuum.

"The laser annealing of amorphous selenium films is carried out through the substrate," the academics explain. "With this' overlay 'laser annealing strategy, light energy is mainly absorbed near the carrier separation junction,

Rather than an open surface where the selenium can evaporate away again."

Tested under standard lighting conditions, the battery achieved a power conversion efficiency of 5.0% and a record fill factor of 63.7%. The device also achieved a record ideal factor value n = 1.37. The ideal factor indicates how similar the characteristics of a solar cell are to those of an ideal diode.

"Notably, this fill factor value is the highest reported for selenium solar cells, and the fill factor of the laser-annealed sample was repeatably better than that of the hot-annealed control sample regardless of the laser dose range studied." The scientist said. "The increase in the filling factor could be attributed to more optimally aligned grains and flat surface morphology."

The paper "Laser Annealing and Solid Phase epitaxy of Selenium thin Film Solar Cells" published by ACS Publications describes the solar cell.

The same research team introduced a 0.30 cm 2 selenium solar cell in December with an open-circuit voltage of 0.99 V, a world record.

Source: Laser Network

Связанные рекомендации
  • The construction of Hefei Advanced Light Source Project held a launch ceremony, expected to be completed and released in 5 years

    Recently, in the Future Science City of Hefei City, Anhui Province, the National Major Science and Technology Infrastructure Project and Supporting Projects of Hefei Advanced Light Source announced the start of construction, with a planned land area of approximately 656 acres. The first phase of the project is expected to be completed by September 2028.After completion, it will become an internati...

    2023-09-23
    Посмотреть перевод
  • 3D printed nanocellulose for green building applications

    The hydrogel material made of nano cellulose and algae was tested as an alternative and more environmentally friendly building material for the first time. This study from Chalmers Institute of Technology and the Wallenburg Wood Science Center in Sweden demonstrates how to 3D print rich sustainable materials into various building components, using much less energy than traditional building methods...

    2024-02-19
    Посмотреть перевод
  • New types of lenses in optics: Researchers develop hybrid achromatic lenses with high focusing efficiency

    Researchers at the University of Illinois at Urbana Champaign have developed compact visible wavelength achromatic mirrors using 3D printing and porous silicon, which are crucial for miniaturization and lightweight optical devices. These high-performance hybrid micro optical devices can achieve high focusing efficiency while minimizing volume and thickness. In addition, these microlenses c...

    2023-12-11
    Посмотреть перевод
  • Scientists have demonstrated a new way to make infrared light from quantum dots, and the experiments are still in the early stages

    Scientists at the University of Chicago have demonstrated a way to create infrared light using colloidal quantum dots. The researchers say this approach shows great promise; Although the experiment is still in its early stages, these quantum dots are already as efficient as existing conventional methods.These points could one day form the basis of infrared lasers, as well as small and inexpensive ...

    2023-09-08
    Посмотреть перевод
  • Yangtze Welcomes 8th Overseas Production Site

    On August 8, local time, Jalisco, Mexico welcomed the grand opening of Yangtze Optics Mexico Cable S.A. de C.V., marking the eighth overseas production base of Yangtze Optical Fiber & Cable Co. ("Yangtze Fiber Optics") has successfully set up its eighth overseas production base in its 36-year development history, further advancing its internationalization strategy blueprint. Today, we are pr...

    2024-08-14
    Посмотреть перевод