Русский

Trumpf Laser releases latest fiscal year data

498
2024-07-19 11:12:48
Посмотреть перевод

Recently, German laser giant Trumpf released data for the fiscal year 2023/24. The latest financial report shows that the group's sales decreased by 4% and order volume decreased by 10% in the fiscal year 2023/24.

Despite these setbacks, Germany has become the company's strongest single market for the first time in many years, highlighting a shift in market dynamics.

At the end of this fiscal year, both the sales and order volume of Trumpf Group decreased.

According to preliminary calculations, the company's sales revenue for the fiscal year 2023/24 (reported on June 30, 2024) was 5.2 billion euros, slightly lower than last year's record breaking 5.4 billion euros.

However, the decline in order volume was even more rapid, with a 10% decrease in order volume to 4.6 billion euros in the year ending June 2024. By comparison, last year was 5.1 billion euros, while the previous year was 5.6 billion euros.

Sales in Germany
According to market analysis by different geographical regions, in the German market this fiscal year, the sales growth of Express was the most significant: an increase of about 4.5%, reaching 815 million euros (compared to 779 million euros last year). This is the first time in many years that Germany has become the largest single market for Transfast.

However, in the US market, Trumpf failed to catch up with the strong growth of the previous year. Sales decreased by approximately 12%, to around 790 million euros. (Last year: 899 million euros). The strongest Asian market is China, with sales of approximately 615 million euros (compared to 602 million euros last year).

Macro environment affects business operations
Nicola Leibinger Kamm ü ller, CEO of Transfast, attributed the latest performance results to global trends rather than specific issues with the company's business. She stated, "The global economic downturn and geopolitical uncertainty have led to significant hesitation among many customers regarding new investments. Continued weak demand will also affect the coming months of this fiscal year. Transfast has continued to respond to this economic crisis through clear measures to improve returns.

In addition, data shows that the current number of employees in the entire group has increased to approximately 18550. As of June 30, 2024, the company employed approximately 9100 employees in Germany, with around 6000 of them working at its headquarters in Diqingen, Germany.
Trumpf will release detailed data for the latest fiscal year, including profits and specific data for its laser business, when it releases its annual report in October.

About Trumpf
TRUMPF was founded in 1923 and this year marks the milestone of its 101st anniversary. Trumpf has long been committed to the fields of lasers and machine tools, and is the only manufacturer in the world that can supply extreme ultraviolet (EUV) lithography machine light sources. In the 1980s, Trumpf installed its first machine tool equipment in China.

Source: OFweek

Связанные рекомендации
  • Researchers have developed a QCL DFB continuous laser for gas detection

    Alpes Laser was founded in 1998 in Nazhatel, Switzerland and was the first company to bring quantum cascade lasers to the market. It released its first continuous laser in 2001 and its first high gain laser in 2009, thus maintaining this priority position.In 2004, the first commercial laser was introduced.Principle: In a single mode laser, the grating is etched into the active region to force the ...

    2023-08-16
    Посмотреть перевод
  • Underwater laser cutting has been achieved with several advantages over common technologies such as saws, automatic wire saws and plasma cutting machines

    Due to the growing demand for renewable energy, the need for modern technologies to dismantle existing underwater infrastructure is also growing.For example, in order to boost the power of an offshore wind farm to a higher level, the existing old steel frame, which may be below sea level, must first be removed so that engineers can rebuild the steel frame for higher power.In laboratory tests, rese...

    2023-09-13
    Посмотреть перевод
  • 3D printed nanocellulose for green building applications

    The hydrogel material made of nano cellulose and algae was tested as an alternative and more environmentally friendly building material for the first time. This study from Chalmers Institute of Technology and the Wallenburg Wood Science Center in Sweden demonstrates how to 3D print rich sustainable materials into various building components, using much less energy than traditional building methods...

    2024-02-19
    Посмотреть перевод
  • Zhejiang University has prepared ultra strong and tough 3D printing elastic materials

    Professor Xie Tao and researcher Wu Jingjun from the School of Chemical Engineering and Biotechnology at Zhejiang University have designed a new type of photosensitive resin and used it to create a "super rubber band" that can stretch to over 9 times its own length and lift 10 kilograms of objects with a "body" with a diameter of 1 millimeter through 3D printing. The relevant results were recently...

    2024-07-06
    Посмотреть перевод
  • Rachel's latest laser welding and cutting machine processes thicker materials at lightning speed

    Rachel is a pioneer in laser technology solutions and is pleased to announce a significant update to its laser welding and cutting machines. These enhanced features aim to provide customers with faster turnaround time and higher accuracy, reaffirming Rachel Corporation's commitment to providing cutting-edge laser cutting and welding solutions to meet the needs of different industries.Lache Company...

    2024-04-07
    Посмотреть перевод