Русский

Progress made in the research and development of high-performance electrically pumped topology lasers by the Institute of Semiconductors, Chinese Academy of Sciences

324
2024-06-06 14:22:49
Посмотреть перевод

Topological laser (TL) is a laser device designed and manufactured using the principles of topological optics, which can produce a robust single-mode laser and is an ideal light source for future new optoelectronic integrated chips. Electrically pumped topology lasers have become a research hotspot due to their small size and ease of integration, but topology lasers based on electrical injection are still in the early stages of research. Therefore, it is crucial to develop design ideas and technical solutions to improve the output power of electrically pumped topology lasers.

Recently, the team led by Liu Fengqi, a researcher at the Institute of Semiconductors, Chinese Academy of Sciences, has made progress in the research and development of high-performance electrically pumped topology lasers. This study innovatively introduces the design of surface metal Dirac topological cavities (SMDCs), which are prepared on the surface metal layer to preserve the integrity of the active region, providing sufficient gain for achieving high-power output, thereby solving the problem of power improvement of electrically pumped topological lasers limited by active region etching; By utilizing the strong coupling between SMDC and the active region and optimizing the design of absorption edge and topological cavity parameters under low effective refractive index difference, robust topological interband mode operation was achieved, which was validated in the robust single-mode laser spectrum and far-field mode of topological lasers with different structural parameters.

Due to the fact that the SMDC design does not damage the active region and the SMDC structure has high surface radiation efficiency, the device achieved a single mode surface emission peak power of 150 milliwatts. In addition, the device has a vortex polarization far-field, and by introducing phase modulation, while maintaining the vortex polarization characteristics of the topological laser, a symmetrical adjustable far-field is obtained. This device is an ideal on-chip vortex polarized light source.

 

 

Structure of Electric Pumped THz SMDC TL Device


This work provides new ideas for the research and development of high-performance electrically pumped topology lasers, and has positive significance for promoting the development and application of high-performance electrically pumped topology lasers. The relevant research results are titled High power electrically pumped terahertz topological laser based on a surface metal Dirac vortex activity and published in Nature Communications. The research work was supported by the National Natural Science Foundation of China, the National Key R&D Program and the Youth Innovation Promotion Association of the Chinese Academy of Sciences.

Source: Institute of Semiconductors, Chinese Academy of Sciences

Связанные рекомендации
  • The efficiency of crystalline silicon solar cells has exceeded 27% for the first time, and Longi's research results have been published in Nature

    Recently, Longi Green Energy Technology Co., Ltd. (hereinafter referred to as "Longi"), as the first unit, published a research paper titled "Silicon heterojunction back contact solar cells by laser patterning" online in the journal Nature, reporting for the first time the research results of breaking through 27% of the photoelectric conversion efficiency of crystalline silicon cells through full ...

    2024-10-18
    Посмотреть перевод
  • Laser company nLIGHT announces financial results for the second quarter of 2024

    Recently, nLIGHT, a manufacturer of high-power semiconductors and fiber lasers, announced its financial performance for the second quarter of 2024.According to the financial report, nLIGHT achieved a revenue of $50.5 million in the second quarter of 2024, a year-on-year decrease of 5.2% and an increase of 13% compared to the first quarter; The GAAP net loss for the second quarter was $11.7 million...

    2024-08-20
    Посмотреть перевод
  • The influence of laser beam drift on SLM thin-walled TC11 specimens at high scanning speed

    AbstractDue to the width of the laser melt pool and the sintering effect on the surrounding powder, the experimental size of the selective laser melting (SLM) sample will be larger than the design size, which will greatly affect the dimensional accuracy and surface quality of the thin-walled sample. In order to obtain SLM thin-walled TC11 specimens with precise dimensions, an orthogonal experiment...

    02-24
    Посмотреть перевод
  • Aerotech announces new control features for laser scanning heads

    Aerotech has upgraded the performance of AGV laser scanning heads through powerful controller functions to enhance scanner control (ESC). The new ESC function of the Automation 1-GL4 2-axis laser scanning head driver is a completely passive control loop enhancement function that ensures higher accuracy in the most dynamic motion.With the increasing demand for higher output laser technology in vari...

    2024-06-04
    Посмотреть перевод
  • Bodor Laser: Laser Cutters Rank First in Global Sales for Six Consecutive Years

    On February 27, at Bodor Laser's global headquarters base in Licheng District, Jinan City, three automated production lines were operating at full capacity, struggling to meet the overwhelming demand. Lu Guohao, Secretary of the Board and Director of the President's Office at Bodor Laser, revealed that the company's laser cutter shipments exceeded 8,000 units in 2024, securing the top spot in glob...

    03-10
    Посмотреть перевод