Русский

Ruisheng Clyde Aerospace Company Commercializes TNO's Satellite Communication Laser Terminal

226
2024-05-24 14:09:09
Посмотреть перевод

AAC Clyde Space, a small satellite technology multinational company headquartered in Uppsala, Sweden, has obtained the right to manufacture and distribute laser satellite communication terminals using the optical technology of the Dutch research institution TNO.

TNO's technology helps to transmit satellite generated data to Earth through lasers, with the potential to achieve high speed and security in broadband connections, surpassing traditional radio frequency communication methods.

In addition, the Dutch company FSO Instruments is a supplier of terminal core optical components, which also originate from TNO's research. This arrangement may help establish an international supply chain for laser satellite communication terminals.

TNO Space Director Kees Buyjsrogge commented, "This new collaboration highlights our commitment to accelerating technology transfer, promoting the growth of Dutch optical satellite communication capabilities, and strengthening strong networks within Europe and NATO.".

The new agreement grants Raytheon Clyde Aerospace the right to use TNO laser communication terminal technology for 20 years. These terminal sizes are 10 x 10 x 10 centimeters, suitable for small satellites that AAC Clyde Space excels at. Their goal is to manufacture a commercially viable laser communication terminal for small satellites that can be mass-produced.

In order to fully develop AAC terminals, Clyde Space requires additional optical technology, FSO instruments will provide these technologies. FSO Instruments has recently signed a similar licensing agreement to leverage TNO's technology and expertise in optical heads, optical workbenches, and coarse pointing alignment systems.

By cross licensing TNO's optical technology, it has established a supply chain for producing small satellite communication terminals, which is pioneering in the Netherlands.

Operation mode
Laser satellite communication provides links between ground stations, satellites, aircraft, and drones. Using the infrared band, laser communication can achieve data transmission speeds that are 100 to 1000 times faster than radio frequencies currently used for communication. In addition, laser communication links are considered safer because they use very narrow optical laser beams instead of wide radio signals.

Luis Gomes, CEO of Raytheon Clyde Aerospace, said, "The advancement of high data volume payloads (such as Earth observation payloads for cube satellites and small satellites) highlights the necessity of improving downlink capabilities in small sizes. The global demand for laser satellite communication applications is on the rise. Through this collaboration, we can not only leverage this demand but also strengthen the international reputation of the Netherlands in innovative new space solutions.".

Source: Laser Net

Связанные рекомендации
  • More penetrating than X-rays μ Meson imaging is expected to be advanced with high-power lasers

    μ Mesons are naturally occurring subatomic particles that can penetrate much deeper dense matter than X-rays. Therefore, μ Meson imaging can enable scientists to capture images of nuclear reactors, volcanoes, tsunamis, and hurricanes. However, this process is slow, as it occurs naturally μ The low flux of mesons requires several months of exposure time for the image.It is understood that ...

    2023-11-01
    Посмотреть перевод
  • Laser Photonics wins a large order from Lufthansa Technologies subsidiary

    Recently, American laser cleaning system developer Laser Photonics announced that the company has successfully secured an order for a cleaning technology laser cleaning system from Lufthansa Technik Puerto Rico, a technology subsidiary of Lufthansa, the largest aviation group in Europe.Lufthansa Technik is the world's largest independent provider dedicated to providing maintenance, repair, and com...

    2023-12-19
    Посмотреть перевод
  • Researchers successfully 3D printed polymer based robotic arms through laser scanning

    Researchers from the Federal Institute of Technology in Zurich and an American startup used slow curing plastic to develop durable and sturdy robots using high-quality materials.The team can now print these complex robots at once and combine soft, elastic, and rigid materials together. This allows for the creation of precision structures and parts with cavities as needed.Inkbit, a derivative compa...

    2023-11-16
    Посмотреть перевод
  • OPO laser testing optical components

    Optical parametric oscillator laser tests fibers and components to characterize the spectral response of optical components, thereby providing a competitive advantage in the optical industry.OPO lasers have long been used in complex testing and measurement applications, such as mass spectrometry, photoacoustic imaging, and spectroscopy. Now, these "tunable" pulse lasers are being used to facilitat...

    2024-02-20
    Посмотреть перевод
  • Preparation of all silicon dielectric metasurface by femtosecond laser modification combined with wet etching, achieving ideal compatibility with complementary metal oxide semiconductor technology

    The fully dielectric element surface has the characteristics of low material loss and strong field localization, making it very suitable for manipulating electromagnetic waves at the nanoscale. Especially the surface of all silicon dielectric elements can achieve ideal compatibility with complementary metal oxide semiconductor technology, making it an ideal choice for large-scale monolithic integr...

    2023-10-23
    Посмотреть перевод