Русский

Progress in research on neodymium doped strontium aluminate lanthanum magnesium laser crystals by Shanghai Optics and Machinery Institute

489
2024-04-17 16:11:47
Посмотреть перевод

Recently, the Advanced Laser and Optoelectronic Functional Materials Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made progress in the research of Nd: ASL (Sr0.7Nd0.05La0.25Mg0.3Al22.7O19) laser crystals, and the related achievements were published in Infrared Physics&Technology under the title of "Tunable laser operations on Nd doped continuum and lanthanum aluminum crystals".

Neodymium (Nd3+) ion is one of the common activating ions, and its absorption peak matches the emission wavelength of commercial laser diodes (LDs), with high absorption efficiency at 0.9, 1.05, and 1.35 μ There are emission peaks at position m, and laser emission has been achieved in various matrix materials. Nd: ASL is a typical disordered crystal, belonging to the hexagonal crystal system. The high disorder leads to its spectral broadening, which is beneficial for generating lasers of different wavelengths.

In order to investigate its tuning characteristics, the research team grew Nd: ASL crystals with a doping concentration of 5%, and measured their fluorescence lifetime to be approximately 371.8 μ S. At 1.05 μ Near m, its fluorescence spectrum has four strong and continuous emission spectra. A birefringent filter was inserted into the V-shaped resonant cavity for tunable laser experiments. By using output mirrors with transmittance of 5%, 7%, and 10%, three independent wavelengths (1050, 1062, and 1074 nm) of laser output were obtained. The wavelength range is 1049.59-1054.43 nm and 1059.71-1078.18 nm for tuning, with a tuning width greater than 20 nm, which is consistent with the spectrum. The phenomenon of multi wavelength laser output was also observed in the experiment. The results indicate that Nd: ASL crystals are a gain medium suitable for tunable lasers. Compared with single wavelength laser media, controlling and changing the wavelength is much more convenient and suitable for complex application scenarios with higher accuracy or more wavelengths.

This work has received support from projects such as the National Natural Science Foundation of China.

Figure 1. Fluorescence spectrum of Nd: ASL crystal

Figure 2. Laser output with three wavelengths at different output mirror transmittance

Figure 3. Output power at different wavelengths under the same absorption pump power

Source: Shanghai Institute of Optics and Precision Machinery

Связанные рекомендации
  • POSTECH launches a new type of fiber optic fusion splicer FS-23 series

    FOSTEC announced on the 8th that a new type of fiber fusion splicer has been launched. The newly launched FS-23 series is a fusion splicer that can be used for fiber optic operations in long-distance optical networks and CCTV optical networks. It not only has a small size and light weight, but also has a sturdy design and a long-lasting battery, which can provide high-precision performance.A perso...

    2024-01-08
    Посмотреть перевод
  • MIT research enables 3D printers to recognize new materials

    According to scientists at MIT, mathematical formulas developed by MIT researchers and other institutions can significantly improve the sustainability of 3D printing.Issues with 3D printing of plastics3D printers typically use mass-produced polymer powders to print parts, which are consistent and predictable, but also difficult to recycle.Other more environmentally friendly options also exist and ...

    2024-04-18
    Посмотреть перевод
  • Shanghai Institute of Optics and Fine Mechanics has made progress in the generation of third harmonic in laser air filamentation

    Recently, the team from the State Key Laboratory of Intense Field Laser Physics, Shanghai Institute of Optics and Mechanics, Chinese Academy of Sciences found that the third-order harmonics induced by air filamentation of high repetition rate femtosecond lasers have significant self jitter. To solve this bottleneck problem, a solution based on an external DC electric field was proposed, which sign...

    2024-10-10
    Посмотреть перевод
  • Gooch&Housego successfully acquires Phoenix Optical Technologies

    Recently, renowned precision optical technology manufacturer Gooch&Housego (G&H) announced the successful acquisition of Phoenix Optical Technologies, a precision optical manufacturer located in St. Asaf, Wales, UK. The acquisition transaction amounts to £ 6.75 million, which not only consolidates G&H's market position in the aerospace and defense sectors, but also significantly expa...

    2024-11-04
    Посмотреть перевод
  • Ultra capillary properties of composite liquid absorbing cores manufactured by laser powder bed melting additive manufacturing

    Researchers from Sichuan University, the Key Laboratory of Advanced Special Materials and Preparation Processing Technology of the Ministry of Education, and the Nuclear Additive Manufacturing Laboratory of China Nuclear Power Research and Design Institute reported on the study of the ultra capillary performance of laser powder bed melting additive manufacturing composite structure liquid absorbin...

    03-20
    Посмотреть перевод