V8 software CAD plug-in installation failed

Abel

Категории:

Ruida

Теги:

V8
CAD
VBA plugin

775

Посмотреть перевод

05-19

Fault analysis:

1. The installation path is not selected correctly
2. No VBA plugin downloaded
3. The VBA plugin version is incorrect compared to the CAD version

Solution:

The reinstallation path is correct. After checking, it was found that the CAD version sent was 2023 and the VBA plugin version was 2018, which caused the failure. After re downloading the VBA board 2023, the installation was successful

Нет комментариев

Актуальные рекомендации

Следовать

Нравится

Собирать

Сообщить

V8 software CAD plug-in installation failed

USB is not connected (with COM port)

RDC6332M, when it can follow up, press the auto focus button, the laser head starts to descend, touches the iron plate, and then rises to the reference focus position, and then stops, without lifting

Once powered on, the cutting head will always move upward, and will not stop. Switch to the manual state, and the motor can be controlled to move, and then switch to the automatic mode, and always mov

vcutworks

The RDC6442 board fails to connect the device in the processing preview when downloading graphics to the back panel of the motherboard