Can I change the I/O port assignment?

Henry

Категории:

Лазер

Теги:

LightBurn

939

Посмотреть перевод

2023-03-21

I have received a new lens and used (after great difficulty) the spouses Windows machine to use corfille application for lens adjustment…
My assumption is I got the something wrong when I did the alignment of the new F254 lens. The lens works properly, but my i/o setting appear to have gone astray.
My foot switch doesn’t work with this lens… When I look at the Device Settings, the i/o on the F420 (300mm) shows lots of green, the F254 (170mm) does not…
Can/how do I change these now? I’d prefer to do it without the re-calibration of the lens.

Williams

2023-03-22

I thought the machine was powered up, but it wasn’t…
Now I need to find out why the foot switch doesn’t work with this lens…
I’ll change it and see if the issue follows the lens…
From the sound of things, it was operator error…
A quick question on editing a device. If I wish to change just the name, do I have to re-read the markcfg7 when I step through it or does it retain the original information?
I don’t know if I have a markcfg7 file for this new lens… The only one I have is for the F420 lens… it was the stock lens. I loaded the cor file after running the CorFile2 application for the new lens.
Thank you

Посмотреть перевод

Ответить

Актуальные рекомендации