Everything works great except lightburn is not tracking, in the program, my laser’s movement. The laser is burning, it works fine. But as you can see on the attached image, the upper green and red squares? Those never move.Any advice is appreciated, I searched but didn’t find anything that helped, maybe just a link in the right direction? Appreciat...

Ethan

02-15

1K

4

0

Possible causes of malfunction:Excessive clearance of bearings due to wear and tear;Uneven air gap affects the balance of the motor;Unbalanced rotor leads to vibration;The bending deformation of the shaft affects the operation of the motor;Iron core deformation or looseness, affecting the stability of the motor;The center of the coupling (or pulley...

Henry

02-17

986

0

0

Principle of adjusting laser powerThe power of the laser marking machine directly determines the depth and speed of marking. Different materials have different requirements for laser power, and adjusting the laser power to be just right can ensure the best marking effect.Choose the appropriate power size1. Metal materials:For metal materials, hig...

Jamie

02-15

947

0

0

Reasons for poor laser weldingPoor laser welding can be caused by various reasons, such as improper welding parameter settings, poor quality of welding materials, improper preparation of welding surfaces, and malfunction of welding equipment.1. Improper setting of welding parametersWhen the parameters such as laser power, focal length, and focal ...

Cyril

02-14

999

0

0

Cuts/Layers.When I slect “fill” it does not fill the text or object in the work area? What am I missing?

AL.TAL

02-12

755

2

0

Switched from rollers to chuck and now the image/texts are reversed. Did I miss a setting somewhere. Are they different from using the rollers to the chuck? Xtool D1 Pro 20W with RA2 Rotary. Any advice appreciated.

James

02-10

868

4

0

Reasons for black welding in laser weldingThe blackening of laser welding is generally caused by the following reasons:1. Gas pollution: During laser welding, impurities in the gas may cause incomplete melting, resulting in blackening of the weld surface.2. Insufficient energy: If the energy of the laser is insufficient, the temperature of the wel...

Payson

02-13

1K

0

1

What would suddenly cause the camera to be about 2 inches off in the Y axis? I was using the camera for a few cuts to salvage some scrap and it was working perfectly as usual then from one set up to the next, it framed two inches higher in the Y axis than showed in the picture, There were no bumps or shocks to the lid or cabinet, the alignment was ...

Iron Man

02-11

817

2

0

I am just learning and new, still on the trial package. In the lightburn program and I am wondering why the mirror button doesn’t show up to use anywhere, not on the tool bar and not down the Arrange section. Maybe I have to turn it on but have no idea and have search the net over and over but nothing about the missing button. I know about how to c...

berainlb

02-08

1.2K

5

0

This design with ruida software RDWorks V8And I cut it from ruida rdc6445g and results was amazing do you try it link is here ??https://m.chanelink.com/share/design/1294

S A Designs

01-23

907

7

8

plate rolling machine factoryWelcome to my plate rolling machine factory, where you can find the high-quality plate rolling machine you need at a cheap price, waiting for your consultation.Welcome to experience the excellent performance of our sheet metal plate rolling machine and special metal plate rolling machine, which are designed to reduce em...

qshbcn

2024-12-29

850

1

1

During the use of laser rust removal machines, various common problems may be encountered, which can be summarized as follows:1、 Optical path and laser source issuesFiber aging or damage:Phenomenon: After a period of use, optical fibers are prone to aging, leading to a decrease in power and signal attenuation, which affects the rust removal effec...

Kevin

02-12

878

0

0

In modern industry, laser cleaning is rapidly emerging as a superior surface treatment technology. Especially with the application of fiber lasers, the popularization and improvement of this technology have been achieved. Fiber lasers have become the best choice for laser cleaning light sources due to their high reliability, stability, and flexibil...

Marshall

02-10

1K

0

0

Do you like the piggy bank? Look at this one I made?

Jack Wilborn

2023-02-02

1.1K

3

4

How to Vote: Select the features you most want to see in the software (multiple choices allowed) and feel free to share additional ideas in the comments!

Leon

02-06

1.6K

1

1