Generally, the following aspects should be considered for inspection:1) Whether the motor torque is large enough and whether it can drive the load, we generally recommend users to choose a motor with a torque 50% to 100% greater than the actual need when selecting, because stepper motors cannot run under load, even in an instant, it will cause step...
2024-02-201K101、 Precautions for starting a handheld laser welding machinePower on sequence: turn on the air switch → wait for three to five seconds for the water machine to start, then turn on the emergency stop and key switch → wait for the touch screen to enter the interface, set the welding parameters → click on the air valve to test whether t...
2024-02-191K101. It is not impossible to drill holes on the solder pad. If you are willing to spend money on small holes, the laser hole and plugging process should be fine;a. For BGA pads with a spacing of less than or equal to 0.5mm, they must be very dense and holes must be drilled on the pads; The difficulty and cost of PCB plate making process have increase...
2024-02-1983210As is well known, ultraviolet laser chillers are one of the many classifications of chillers, widely used in the laser production and processing industry, such as various types of lasers and laser equipment with various powers. However, if we want the use of UV laser chillers to become more long-lasting, we must carefully maintain the chiller.Mai...
2024-02-1992310I saw a device without any sensors, and the servo can return to the origin very accurately. The servo is from Yaskawa, and the encoder is incremental. The servo motor rotates in a circular motion, sometimes it cannot rotate less than one turn, and once the action is completed, it returns to the origin. Sometimes it may take several rotations to ret...
2024-02-181.1K201. Microcontroller systemUsing a microcontroller system to achieve motion control has a lower cost, but the development difficulty is high and the cycle is long. This solution is suitable for users with large product batches, simple control system functions, and experience in microcontroller development.2. Professional motion control PLCMan...
2024-02-18978101、 Servo systemA servo system refers to an automatic control system that utilizes the action of a component (such as a control rod) to reach or approach a predetermined state, and can compare the desired state (desired value) with the actual state, adjusting the control components according to their differences (sometimes the rate of change of this...
2024-02-1899410A reducer is a mechanical device used to reduce the output speed of a high-speed rotating motor or engine while increasing torque. It is widely used in various industrial transmission systems, such as machine tools, power, metallurgy, chemicals, textiles, printing and dyeing, food, medicine, automobiles, aerospace, etc.The reducer itself cannot g...
2024-02-0393010Who has DVPHE3PLC? How to read data from the upper computer using 232? What data needs to be noted
2024-02-0381510RDC6442, the software version before V8.0.06, draws a diagram and downloads it to the motherboard, but "file incompatibility" will appear when the panel is processed. It is OK to download it again, I don't know why?
2022-11-141.4K84The characteristics of servo drives1. The servo driver software program mainly includes the main program, interrupt service program, and data exchange program.2. The main program of the servo driver is mainly used to complete system initialization, LO interface control signals, and the setting of registers in various control modules within the DSP....
2024-02-0197210A frequency converter is a power control device that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's operating power supply. The frequency converter mainly consists of rectification (AC to DC), filtering, inversion (DC to AC), braking unit, driving unit, detection un...
2024-02-0197410With more and more technologies widely applied in industrial automation, we have entered the era of Industry 4.0. New technologies continue to emerge, empowering artificial intelligence and machine learning, data analysis, industrial networks, network security, and functional security. However, most industrial automation, as the core of all other t...
2024-01-311.1K10Lightburn boots OK and works for a while. Then it gets into a mode where double clicking on the e.g. cut/layers menu comes up for a fraction of a second, and then disappears. If I click on Windows to see where it might have gone, I can only click on that oonce and then it disappears. Any thoughts?
2024-01-3192611
- Нет данных
Русский
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski